bcw.s.s.01772.01772

SHEAR PLATE CONNECTION SUMMARY

Filler Beam profile: W18X40
Column profile: W14X145
Slope: 0 deg.
Skew: 90
Vertical Offset: 0
Horizontal Offset: 0
Span: 19.9 ft.
Reaction, V: 28 kips
Shear Capacity, Rn: 28.1 kips
Design/Reference according to AISC 14th Ed. - ASD
Shear Plate: Extended Configuration
Beam material grade: A992
Support material grade: A992
Plate material grade: A572-GR.50
Weld grade: E70
Stabilizer plate grade: A572-GR.50
Shear Plate Size: 14.500 in. x 11.500 in. x 0.500 in.
Shear Plate Detailing Height at Support: 11.500 in.
Shear Plate Detailing Width at Support: 7.375 in.
Stabilizer plate size: 12.500 in. x 7.375 in. x 0.625 in.
(Required due to user requirement)
Configuration Geometry:
Welds at shear plate to support: 5/16 FILLET, 5/16 FILLET
Welds at stabilizer plate :
at column flange: 5/16 FILLET, 5/16 FILLET
at column web: 4/16 FILLET, 4/16 FILLET
at shear plate: 4/16 FILLET, 4/16 FILLET
Bolt: 3 rows x 2 columns 0.875 in. Diameter A325N_TC bolts
Vertical spacing: 4.5 in.
Horizontal spacing: 3 in.
Shear plate edge setback = 8 in.
Beam centerline setback = 8 in.
Edge distance at vertical edge of plate: 1.75 in.
Edge distance at top edge of plate: 1.25 in.
Edge distance at bottom edge of plate: 1.25 in.
Edge distance at vertical edge of beam: 1.75 in.
Horizontal distance to first hole: 9.75 in.
Down distance from top of filler beam flange: 3 in.
Holes in beam web: STD diameter = 0.938 in.
Holes in shear plate: SSL diameter = 0.938 in., slot width = 1.12 in.

BOLT SHEAR CAPACITY AT BEAM AND SHEAR PLATE SIDE:
Bolt Shear Capacity at Shear Load Only:
Using Instantaneous Center Of Rotation Method (AISC 7-1)
ex = 11.250 in.
Angle = 0.000 deg.
C = 1.730
Using Table 7-1 to determine (1/omega)rn:
(1/omega)Rn = (1/omega)rn * C = 16.24 * 1.73 = 28.08 kips


Total Vertical Bolt Shear Capacity = 28.08 kips
28.08 kips >= 28.00 kips (OK)

BOLT BEARING AT BEAM AND SHEAR PLATE SIDE
Vertical Shear Only Load Case:
ICR cordinate relative to CG = (1.41, -0.00)
At Row 1, At Column 1:
Ribolt = 15.94 kips
Ri vector at Beam   = <13.38, 8.65>
Lcsbm at Beam spacing  = 4.13 in.
Lcebm at Beam edge    = 5.06 in.
(1/omega)Rnsbm at Beam spacing = (1/omega) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * 4.13 * (0.32/1) * 65.00 = 50.76 kips/bolt
(1/omega)Rnebm at Beam edge = (1/omega) * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 5.06 * (0.32/1) * 65.00 = 62.14 kips/bolt
(1/omega)Rndbm on Beam at Bolt Diameter   = (1/omega) * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.88 * (0.32/1) * 65.00 = 21.50 kips/bolt
Beam bearing capacity, (1/omega)Rnbm = min((1/omega)Rnsbm,(1/omega)Rnebm,(1/omega)Rndbm) = min(50.76, 62.14, 21.50) = 21.50 kips/bolt
Ri vector at Shear Plate   = <-13.38, -8.65>
Lcsshpl at Shear Plate spacing  = 4.09 in.
Lceshpl at Shear Plate edge    = 10.94 in.
(1/omega)Rnsshpl at Shear Plate spacing = (1/omega) * hf1 * Lcs * t * Fu = 0.50 * 1.20 * 4.09 * 0.50 * 65.00 = 79.67 kips/bolt
(1/omega)Rneshpl at Shear Plate edge = (1/omega) * hf1 * Lce * t * Fu = 0.50 * 1.20 * 10.94 * 0.50 * 65.00 = 213.31 kips/bolt
(1/omega)Rndshpl on Shear Plate at Bolt Diameter   = (1/omega) * hf2 * db * t * Fu = 0.50 * 2.40 * 0.88 * 0.50 * 65.00 = 34.12 kips/bolt
Shear Plate bearing capacity, (1/omega)Rnshpl = min((1/omega)Rnsshpl,(1/omega)Rneshpl,(1/omega)Rndshpl) = min(79.67, 213.31, 34.12) = 34.12 kips/bolt
(1/omega)Rn = min((1/omega)Rnbm, (1/omega)Rnshpl) = min(21.499, 34.125) = 21.50 kips/bolt
Bolt Shear Demand to Bearing ratio = 21.50 / 15.94 = 1.35

At Row 1, At Column 2:
Ribolt = 15.72 kips
Ri vector at Beam   = <15.71, -0.32>
Lcsbm at Beam spacing  = 2.06 in.
Lcebm at Beam edge    = 730.50 in.
(1/omega)Rnsbm at Beam spacing = (1/omega) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * 2.06 * (0.32/1) * 65.00 = 25.34 kips/bolt
(1/omega)Rnebm at Beam edge = (1/omega) * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 730.50 * (0.32/1) * 65.00 = 8974.22 kips/bolt
(1/omega)Rndbm on Beam at Bolt Diameter   = (1/omega) * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.88 * (0.32/1) * 65.00 = 21.50 kips/bolt
Beam bearing capacity, (1/omega)Rnbm = min((1/omega)Rnsbm,(1/omega)Rnebm,(1/omega)Rndbm) = min(25.34, 8974.22, 21.50) = 21.50 kips/bolt
Ri vector at Shear Plate   = <-15.71, 0.32>
Lcsshpl at Shear Plate spacing  = 1.88 in.
Lceshpl at Shear Plate edge    = 12.19 in.
(1/omega)Rnsshpl at Shear Plate spacing = (1/omega) * hf1 * Lcs * t * Fu = 0.50 * 1.20 * 1.88 * 0.50 * 65.00 = 36.56 kips/bolt
(1/omega)Rneshpl at Shear Plate edge = (1/omega) * hf1 * Lce * t * Fu = 0.50 * 1.20 * 12.19 * 0.50 * 65.00 = 237.71 kips/bolt
(1/omega)Rndshpl on Shear Plate at Bolt Diameter   = (1/omega) * hf2 * db * t * Fu = 0.50 * 2.40 * 0.88 * 0.50 * 65.00 = 34.12 kips/bolt
Shear Plate bearing capacity, (1/omega)Rnshpl = min((1/omega)Rnsshpl,(1/omega)Rneshpl,(1/omega)Rndshpl) = min(36.56, 237.71, 34.12) = 34.12 kips/bolt
(1/omega)Rn = min((1/omega)Rnbm, (1/omega)Rnshpl) = min(21.499, 34.125) = 21.50 kips/bolt
Bolt Shear Demand to Bearing ratio = 21.50 / 15.72 = 1.37

At Row 2, At Column 1:
Ribolt = 14.77 kips
Ri vector at Beam   = <0.00, 14.77>
Lcsbm at Beam spacing  = 3.56 in.
Lcebm at Beam edge    = 7.03 in.
(1/omega)Rnsbm at Beam spacing = (1/omega) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * 3.56 * (0.32/1) * 65.00 = 43.77 kips/bolt
(1/omega)Rnebm at Beam edge = (1/omega) * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 7.03 * (0.32/1) * 65.00 = 86.38 kips/bolt
(1/omega)Rndbm on Beam at Bolt Diameter   = (1/omega) * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.88 * (0.32/1) * 65.00 = 21.50 kips/bolt
Beam bearing capacity, (1/omega)Rnbm = min((1/omega)Rnsbm,(1/omega)Rnebm,(1/omega)Rndbm) = min(43.77, 86.38, 21.50) = 21.50 kips/bolt
Ri vector at Shear Plate   = <-0.00, -14.77>
Lcsshpl at Shear Plate spacing  = 3.56 in.
Lceshpl at Shear Plate edge    = 5.28 in.
(1/omega)Rnsshpl at Shear Plate spacing = (1/omega) * hf1 * Lcs * t * Fu = 0.50 * 1.20 * 3.56 * 0.50 * 65.00 = 69.47 kips/bolt
(1/omega)Rneshpl at Shear Plate edge = (1/omega) * hf1 * Lce * t * Fu = 0.50 * 1.20 * 5.28 * 0.50 * 65.00 = 102.98 kips/bolt
(1/omega)Rndshpl on Shear Plate at Bolt Diameter   = (1/omega) * hf2 * db * t * Fu = 0.50 * 2.40 * 0.88 * 0.50 * 65.00 = 34.12 kips/bolt
Shear Plate bearing capacity, (1/omega)Rnshpl = min((1/omega)Rnsshpl,(1/omega)Rneshpl,(1/omega)Rndshpl) = min(69.47, 102.98, 34.12) = 34.12 kips/bolt
(1/omega)Rn = min((1/omega)Rnbm, (1/omega)Rnshpl) = min(21.499, 34.125) = 21.50 kips/bolt
Bolt Shear Demand to Bearing ratio = 21.50 / 14.77 = 1.46

At Row 2, At Column 2:
Ribolt = 3.34 kips
Ri vector at Beam   = <0.00, -3.34>
Lcsbm at Beam spacing  = 3.56 in.
Lcebm at Beam edge    = 9.93 in.
(1/omega)Rnsbm at Beam spacing = (1/omega) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * 3.56 * (0.32/1) * 65.00 = 43.77 kips/bolt
(1/omega)Rnebm at Beam edge = (1/omega) * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 9.93 * (0.32/1) * 65.00 = 122.01 kips/bolt
(1/omega)Rndbm on Beam at Bolt Diameter   = (1/omega) * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.88 * (0.32/1) * 65.00 = 21.50 kips/bolt
Beam bearing capacity, (1/omega)Rnbm = min((1/omega)Rnsbm,(1/omega)Rnebm,(1/omega)Rndbm) = min(43.77, 122.01, 21.50) = 21.50 kips/bolt
Ri vector at Shear Plate   = <-0.00, 3.34>
Lcsshpl at Shear Plate spacing  = 3.56 in.
Lceshpl at Shear Plate edge    = 5.28 in.
(1/omega)Rnsshpl at Shear Plate spacing = (1/omega) * hf1 * Lcs * t * Fu = 0.50 * 1.20 * 3.56 * 0.50 * 65.00 = 69.47 kips/bolt
(1/omega)Rneshpl at Shear Plate edge = (1/omega) * hf1 * Lce * t * Fu = 0.50 * 1.20 * 5.28 * 0.50 * 65.00 = 102.98 kips/bolt
(1/omega)Rndshpl on Shear Plate at Bolt Diameter   = (1/omega) * hf2 * db * t * Fu = 0.50 * 2.40 * 0.88 * 0.50 * 65.00 = 34.12 kips/bolt
Shear Plate bearing capacity, (1/omega)Rnshpl = min((1/omega)Rnsshpl,(1/omega)Rneshpl,(1/omega)Rndshpl) = min(69.47, 102.98, 34.12) = 34.12 kips/bolt
(1/omega)Rn = min((1/omega)Rnbm, (1/omega)Rnshpl) = min(21.499, 34.125) = 21.50 kips/bolt
Bolt Shear Demand to Bearing ratio = 21.50 / 3.34 = 6.43

At Row 3, At Column 1:
Ribolt = 15.94 kips
Ri vector at Beam   = <-13.38, 8.65>
Lcsbm at Beam spacing  = 4.13 in.
Lcebm at Beam edge    = 1.61 in.
(1/omega)Rnsbm at Beam spacing = (1/omega) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * 4.13 * (0.32/1) * 65.00 = 50.76 kips/bolt
(1/omega)Rnebm at Beam edge = (1/omega) * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 1.61 * (0.32/1) * 65.00 = 19.84 kips/bolt
(1/omega)Rndbm on Beam at Bolt Diameter   = (1/omega) * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.88 * (0.32/1) * 65.00 = 21.50 kips/bolt
Beam bearing capacity, (1/omega)Rnbm = min((1/omega)Rnsbm,(1/omega)Rnebm,(1/omega)Rndbm) = min(50.76, 19.84, 21.50) = 19.84 kips/bolt
Ri vector at Shear Plate   = <13.38, -8.65>
Lcsshpl at Shear Plate spacing  = 4.09 in.
Lceshpl at Shear Plate edge    = 1.63 in.
(1/omega)Rnsshpl at Shear Plate spacing = (1/omega) * hf1 * Lcs * t * Fu = 0.50 * 1.20 * 4.09 * 0.50 * 65.00 = 79.67 kips/bolt
(1/omega)Rneshpl at Shear Plate edge = (1/omega) * hf1 * Lce * t * Fu = 0.50 * 1.20 * 1.63 * 0.50 * 65.00 = 31.85 kips/bolt
(1/omega)Rndshpl on Shear Plate at Bolt Diameter   = (1/omega) * hf2 * db * t * Fu = 0.50 * 2.40 * 0.88 * 0.50 * 65.00 = 34.12 kips/bolt
Shear Plate bearing capacity, (1/omega)Rnshpl = min((1/omega)Rnsshpl,(1/omega)Rneshpl,(1/omega)Rndshpl) = min(79.67, 31.85, 34.12) = 31.85 kips/bolt
(1/omega)Rn = min((1/omega)Rnbm, (1/omega)Rnshpl) = min(19.839, 31.847) = 19.84 kips/bolt
Bolt Shear Demand to Bearing ratio = 19.84 / 15.94 = 1.24

At Row 3, At Column 2:
Ribolt = 15.72 kips
Ri vector at Beam   = <-15.71, -0.32>
Lcsbm at Beam spacing  = 2.06 in.
Lcebm at Beam edge    = 4.28 in.
(1/omega)Rnsbm at Beam spacing = (1/omega) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * 2.06 * (0.32/1) * 65.00 = 25.34 kips/bolt
(1/omega)Rnebm at Beam edge = (1/omega) * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 4.28 * (0.32/1) * 65.00 = 52.61 kips/bolt
(1/omega)Rndbm on Beam at Bolt Diameter   = (1/omega) * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.88 * (0.32/1) * 65.00 = 21.50 kips/bolt
Beam bearing capacity, (1/omega)Rnbm = min((1/omega)Rnsbm,(1/omega)Rnebm,(1/omega)Rndbm) = min(25.34, 52.61, 21.50) = 21.50 kips/bolt
Ri vector at Shear Plate   = <15.71, 0.32>
Lcsshpl at Shear Plate spacing  = 1.88 in.
Lceshpl at Shear Plate edge    = 1.19 in.
(1/omega)Rnsshpl at Shear Plate spacing = (1/omega) * hf1 * Lcs * t * Fu = 0.50 * 1.20 * 1.88 * 0.50 * 65.00 = 36.56 kips/bolt
(1/omega)Rneshpl at Shear Plate edge = (1/omega) * hf1 * Lce * t * Fu = 0.50 * 1.20 * 1.19 * 0.50 * 65.00 = 23.16 kips/bolt
(1/omega)Rndshpl on Shear Plate at Bolt Diameter   = (1/omega) * hf2 * db * t * Fu = 0.50 * 2.40 * 0.88 * 0.50 * 65.00 = 34.12 kips/bolt
Shear Plate bearing capacity, (1/omega)Rnshpl = min((1/omega)Rnsshpl,(1/omega)Rneshpl,(1/omega)Rndshpl) = min(36.56, 23.16, 34.12) = 23.16 kips/bolt
(1/omega)Rn = min((1/omega)Rnbm, (1/omega)Rnshpl) = min(21.499, 23.161) = 21.50 kips/bolt
Bolt Shear Demand to Bearing ratio = 21.50 / 15.72 = 1.37

Min Bolt Shear Demand to Bearing ratio Beam and Shear Plate for vertical shear only
 = min(1.00, 1.35, 1.37, 1.46, 6.43, 1.24, 1.37) = 1.00

BEARING AT BEAM AND SHEAR PLATE SIDE SUMMARY:
Bearing Capacity at Vertical Shear Load Only, Rbv = Min Bolt Shear Demand to Bearing Ratio * Bolt Shear = 1.00 * 28.08 = 28.08 kips
Rbv = 28.08 kips >= V = 28.00 kips (OK)

Web Depth = d - [Top Cope Depth] - [Bottom Cope Depth] = 17.9 - 0 - 0 = 17.9 in.
Gross Area (Shear) = [Web Depth] * tw = 17.90 * 0.32 = 5.64 in^2
Net Shear Area (Shear) = ([Web Depth] - ([# rows] * [Diameter + 0.0625])) * tw 
    = (17.90 - (3 * 1.00)) * 0.32 = 4.69 in^2

Using Eq.J4-3:
Shear Yielding = (1/omega) * 0.6 * Fybeam * [Gross Area] = 0.67 * 0.6 * 50.00 * 5.64 = 112.77 kips

Using Eq.J4-4:
Shear Rupture = (1/omega) * 0.6 * Fubeam * [Net Area] = 0.50 * 0.6 * 65.00 * 4.69 = 91.52 kips


Block Shear

Using Eq.J4-5:
Block Shear = {(1/omega) * ((0.6 * Fu * Anv) + (Ubs * Fu * Ant))} <= {(1/omega) * ((0.6 * Fy * Agv) + (Ubs * Fu * Ant))}

Block Shear not required.

Gross Area = 0.50 * 11.50 = 5.75 in^2
Net Area = (11.50 - (3 *(0.94 + 1/16))) * 0.50 = 4.25 in^2

Using Eq.J4-3:
Shear Yielding = (1/omega) * 0.6 * Fypl * [Gross Area] = 0.67 * 0.6 * 50.00 * 5.75 = 115.00 kips

Using Eq.J4-4:
Shear Rupture = (1/omega) * 0.6 * Fupl * [Net Area] = 0.50 * 0.6 * 65.00 * 4.25 = 82.88 kips


Block Shear

Using Eq.J4-5:
Block Shear = {(1/omega) * ((0.6 * Fu * Anv) + (Ubs * Fu * Ant))} <= {(1/omega) * ((0.6 * Fy * Agv) + (Ubs * Fu * Ant))}
Block 1 (Shear): 
Gross Shear Length = (11.5 - 1.25) = 10.25 in.
Net Shear Length = 10.2 - (2.5 * (0.938 + 0.0625)) = 7.75 in.
Gross Tension Length = (3 + 1.75) = 4.75 in.
Net Tension Length = 4.75 - (1.5 * (1.12 + 0.0625)) = 2.97 in.
1. (1/omega) * [material thickness] * ((0.60 * Fupl* [net shear length]) + (Ubs * Fupl * [net tension length])) 
    = 0.50 * 0.50 * ((0.60 * 65.00 * 7.75) + (0.50 * 65.00 * 2.97)) = 99.68 kips
2. (1/omega) * [material thickness] * ((0.60 * Fypl * [gross shear length]) + (Ubs * Fupl * [net tension length])) 
    = 0.50 * 0.50 * ((0.60 * 50.00 * 10.25) + (0.50 * 65.00 * 2.97)) = 101.00 kips
Block Shear = 99.68 kips

Block 2 (Shear): 
Gross Shear Length = 2 * (11.5 - 1.25) = 20.50 in.
Net Shear Length = 2 * ( 10.2 - (2.5 * (0.938 + 0.0625)) ) = 15.50 in.
Gross Tension Length = (3 + 1.75) - 1.75 = 3.00 in.
Net Tension Length = 3 - 1 * (1.12 + 0.0625) = 1.81 in.
1. (1/omega) * [material thickness] * ((0.60 * Fupl* [net shear length]) + (Ubs * Fupl * [net tension length])) 
    = 0.50 * 0.50 * ((0.60 * 65.00 * 15.50) + (0.50 * 65.00 * 1.81)) = 165.85 kips
2. (1/omega) * [material thickness] * ((0.60 * Fypl * [gross shear length]) + (Ubs * Fupl * [net tension length])) 
    = 0.50 * 0.50 * ((0.60 * 50.00 * 20.50) + (0.50 * 65.00 * 1.81)) = 168.48 kips
Block Shear = 165.85 kips

99.68 kips >= Vbm = 28.00 kips (OK)

Flexural and Buckling Strength:

Eccentricity at first line of bolts, e = 9.75 in.
Zgross = 16.53 in^3
Znet   = 11.91 in^3
Sgross = 11.02 in^3
Snet   = 7.50 in^3

Using Eq. 9-4
Flexural Rupture = (1/omega) * Fu * Znet / e = 0.50 * 65.00 * 11.91 / 9.75 = 39.69 kips


Using Eq. 9-14 through 9-18, Fcr = Fy * Q
tw = 0.50 in.
ho = 11.50 in.
c = 9.75 in.
lambda = (ho * Fy ^ 0.5) / ( 10 * tw * ( 475.00 + 280.00 * (ho / c)^2 ) ^0.5 ) = 
 = 11.50 * 50.00^0.5 / (10 * 0.50 * (475.00 + 280.00 * (11.50/9.75)^2 )^0.5) = 0.55
When lambda <= 0.70, Q=1
Q = 1.00
Fcrmin =1/omega * Fcr = 0.60 * 50.00 * 1.00 = 30.00 ksi

Using Eq. 9-6
Buckling = Fcr * Sgross / e = 30.00 * 11.02 / 9.75 = 33.91 kips

Interaction Check of Flexural Yielding, Per AISC 10-5: 
Eccentricity at CG of Bolt Group, e = 11.25 in.
Zgross = 16.53
Znet = 16.53
Mr = Vr * e = 28.00 * 11.25 = 315.00 kips-in
Mc = 1/omega * Mn = 1/omega * Fy * Zgross = 0.60 * 50.00 * 16.53 = 495.94 kips-in
Vr = 28.00 kips
Vc = 1/omega * Vn = 1/omega * 0.60 * Fy * Ag = 0.67 * 0.60 * 50.00 * 5.75 = 115.00 kips
Interaction due to moment and shear, (Vr/Vc)^2 + (Mr/Mc)^2 <= 1.0
(Vr/Vc)^2 + (Mr/Mc)^2 = (28.00 / 115.00)^2 + (315.00 / 495.94)^2 = 0.46 <= 1  (OK)

Note: Mn <= 1.6My by inspection

MAXIMUM PLATE THICKNESS:
No of bolt columns = 2
tp  < = db/2 + 1/16 = 0.5 <= 0.5 OK
tw  < = db/2 + 1/16 = 0.315 <= 0.5 OK
Leh(plate) >= 2 * db = 1.75 >= 1.75 OK
Leh(bm) >= 2 * db = 1.75 >= 1.75 OK
Maximum Plate Thickness is Not a Limiting Criteria.

STABILIZER PLATE:

Available Strength to Resist Lateral Displacement:
Using Eq. 10-6 (14th Ed.):
Rn/omega = 1500.00  * 3.14159 * L * tp^3 / a^2 = 0.60 * 1500.00 * 3.14159 * 11.50 * 0.50^3 / 9.75^2 = 42.76 kips
Stabilizer Plate Not Required for lateral displacement

Torsional Strength:
Using Eq. 10-8 and Eq. 10-7 (14th Ed.):
Required, Mta or Mtu = Ra * (tw + tp) /2 = 28.00 * ((0.31 + 0.50) / 2) = 11.38 kips-in
Lateral Shear Strength of Shear Plate, Mtn (no slab) = [1/omega*(0.6*Fyp)-(Ra/(L*tp))] *L*tp^2/2 =  ((0.67 * 0.6 * 50.00) - (28.00 / (11.50 * 0.50))) * 0.5 * 11.50 * 0.50^2 = 21.75 kips-in
Stabilizer Plate Not Required for torsional strength

WELD:

 Weld Requirements:

At shear only case: 
Weld Length for shear, Lv = 10.000 in.
Shear Load per inch per weld, fv = R/Lv/2 = 28.000 / 10.000 / 2 = 1.400 kips/in/ weld 
theta = 0 deg.
cPhi  = 1.0 + 0.5 * sin(0)^1.5 = 1.000
Weld Coefficient = 0.6 * 70.000 * 1.000 * 1.000 * (2^0.5/2)*(1/16) = 1.856
Required weld size, Dv = fv/ (1/omega * coeff) = 1.400 / (0.500 * 1.856) = 1.508/16

Minimum fillet weld size : 
   At shear only load case = 0.09 in.
   per Table J2.4     = 0.19 in.
   5/8tp              = 0.31 in.
   user preference    = 0.25 in.

Dmax1 (using eqn 9-3)
 = tshpl * Fushpl / ( Fexx * C1 * 0.088)
 = 0.500 * 65.000 / ( 70.000 * 1.000 * 0.088 ) 
 = 5.253 
Dmax2 (using eqn 9-3)
 = twsupport * Fusupport / ( Fexx * C1 * 0.088 )
 = 0.680 * 65.000 / ( 70.000 * 1.000 * 0.088 ) 
 = 7.144 
Dmax3 = project max fillet weld = 12.000
Dmax=min(Dmax1, Dmax2, Dmax3) = min(5.253, 7.144, 12.000)
 = 5.253 

Use weld size
D1 = 5.00
D2 = 5.00

Weld Strength :

Vertical weld capacity during shear only load, 1/omega * Rnv1 = 0.50 * 1.86 * 10.00 * (5.00 + 5.00) = 92.81 kips

92.81 kips >= Vbm = 28.00 kips (OK)