bcw.s.s.01403.01403

SHEAR PLATE CONNECTION SUMMARY

Filler Beam profile: W18X40
Column profile: W14X176
Slope: 0.641 deg.
Skew: 90
Vertical Offset: 0
Horizontal Offset: 0
Span: 20 ft.
Reaction, V: 24 kips
Shear Capacity, Rn: 26.7 kips
Design/Reference according to AISC 14th Ed. - ASD
Shear Plate: Extended Configuration
Beam material grade: A992
Support material grade: A992
Plate material grade: A572-GR.50
Weld grade: E70
Stabilizer plate grade: A572-GR.50
Shear Plate Size: 11.875 in. x 14.500 in. x 0.375 in.
Shear Plate Detailing Height at Support: 14.500 in.
Shear Plate Detailing Width at Support: 7.375 in.
Stabilizer plate size: 12.500 in. x 7.375 in. x 0.625 in.
(Required due to user requirement)
Configuration Geometry:
Welds at shear plate to support: 4/16 FILLET, 4/16 FILLET
Welds at stabilizer plate :
at column flange: 5/16 FILLET, 5/16 FILLET
at column web: 4/16 FILLET, 4/16 FILLET
at shear plate: 4/16 FILLET, 4/16 FILLET
Bolt: 5 rows x 1 column 0.875 in. Diameter A325N_TC bolts
Vertical spacing: 3 in.
Horizontal spacing: 3 in.
Shear plate edge setback = 8.09 in.
Beam centerline setback = 8.09 in.
Edge distance at vertical edge of plate: 1.75 in.
Edge distance at top edge of plate: 1.25 in.
Edge distance at bottom edge of plate: 1.25 in.
Edge distance at vertical edge of beam at top bolt: 2 in.
Edge distance at vertical edge of beam at bottom bolt: 1.87 in.
Horizontal distance to first hole: 10.1 in.
Down distance from top of filler beam flange: 3 in.
Holes in beam web: STD diameter = 0.938 in.
Holes in shear plate: SSL diameter = 0.938 in., slot width = 1.12 in.

BOLT SHEAR CAPACITY AT BEAM AND SHEAR PLATE SIDE:
Bolt Shear Capacity at Shear Load Only:
Using Instantaneous Center Of Rotation Method (AISC 7-1)
ex = 10.125 in.
Angle = 0.000 deg.
C = 1.645
Using Table 7-1 to determine (1/omega)rn:
(1/omega)Rn = (1/omega)rn * C = 16.24 * 1.65 = 26.72 kips


Total Vertical Bolt Shear Capacity = 26.72 kips
26.72 kips >= 24.00 kips (OK)

BOLT BEARING AT BEAM AND SHEAR PLATE SIDE
Vertical Shear Only Load Case:
ICR cordinate relative to CG = (1.12, -0.00)
At Row 1, At Column 1:
Ribolt = 15.94 kips
Ri vector at Beam   = <15.67, 2.92>
Lcsbm at Beam spacing  = na
Lcebm at Beam edge    = 16.96 in.
(1/omega)Rnsbm at Beam spacing = (1/omega) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * na * (0.32/1) * 65.00 = na
(1/omega)Rnebm at Beam edge = (1/omega) * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 16.96 * (0.32/1) * 65.00 = 208.39 kips/bolt
(1/omega)Rndbm on Beam at Bolt Diameter   = (1/omega) * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.88 * (0.32/1) * 65.00 = 21.50 kips/bolt
Beam bearing capacity, (1/omega)Rnbm = min((1/omega)Rnsbm,(1/omega)Rnebm,(1/omega)Rndbm) = min(na, 208.39, 21.50) = 21.50 kips/bolt
Ri vector at Shear Plate   = <-15.67, -2.92>
Lcsshpl at Shear Plate spacing  = na
Lceshpl at Shear Plate edge    = 9.73 in.
(1/omega)Rnsshpl at Shear Plate spacing = (1/omega) * hf1 * Lcs * t * Fu = 0.50 * 1.20 * na * 0.38 * 65.00 = na
(1/omega)Rneshpl at Shear Plate edge = (1/omega) * hf1 * Lce * t * Fu = 0.50 * 1.20 * 9.73 * 0.38 * 65.00 = 142.26 kips/bolt
(1/omega)Rndshpl on Shear Plate at Bolt Diameter   = (1/omega) * hf2 * db * t * Fu = 0.50 * 2.40 * 0.88 * 0.38 * 65.00 = 25.59 kips/bolt
Shear Plate bearing capacity, (1/omega)Rnshpl = min((1/omega)Rnsshpl,(1/omega)Rneshpl,(1/omega)Rndshpl) = min(na, 142.26, 25.59) = 25.59 kips/bolt
(1/omega)Rn = min((1/omega)Rnbm, (1/omega)Rnshpl) = min(21.499, 25.594) = 21.50 kips/bolt
Bolt Shear Demand to Bearing ratio = 21.50 / 15.94 = 1.35

At Row 2, At Column 1:
Ribolt = 14.67 kips
Ri vector at Beam   = <13.75, 5.12>
Lcsbm at Beam spacing  = na
Lcebm at Beam edge    = 17.25 in.
(1/omega)Rnsbm at Beam spacing = (1/omega) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * na * (0.32/1) * 65.00 = na
(1/omega)Rnebm at Beam edge = (1/omega) * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 17.25 * (0.32/1) * 65.00 = 211.94 kips/bolt
(1/omega)Rndbm on Beam at Bolt Diameter   = (1/omega) * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.88 * (0.32/1) * 65.00 = 21.50 kips/bolt
Beam bearing capacity, (1/omega)Rnbm = min((1/omega)Rnsbm,(1/omega)Rnebm,(1/omega)Rndbm) = min(na, 211.94, 21.50) = 21.50 kips/bolt
Ri vector at Shear Plate   = <-13.75, -5.12>
Lcsshpl at Shear Plate spacing  = na
Lceshpl at Shear Plate edge    = 10.20 in.
(1/omega)Rnsshpl at Shear Plate spacing = (1/omega) * hf1 * Lcs * t * Fu = 0.50 * 1.20 * na * 0.38 * 65.00 = na
(1/omega)Rneshpl at Shear Plate edge = (1/omega) * hf1 * Lce * t * Fu = 0.50 * 1.20 * 10.20 * 0.38 * 65.00 = 149.24 kips/bolt
(1/omega)Rndshpl on Shear Plate at Bolt Diameter   = (1/omega) * hf2 * db * t * Fu = 0.50 * 2.40 * 0.88 * 0.38 * 65.00 = 25.59 kips/bolt
Shear Plate bearing capacity, (1/omega)Rnshpl = min((1/omega)Rnsshpl,(1/omega)Rneshpl,(1/omega)Rndshpl) = min(na, 149.24, 25.59) = 25.59 kips/bolt
(1/omega)Rn = min((1/omega)Rnbm, (1/omega)Rnshpl) = min(21.499, 25.594) = 21.50 kips/bolt
Bolt Shear Demand to Bearing ratio = 21.50 / 14.67 = 1.47

At Row 3, At Column 1:
Ribolt = 10.64 kips
Ri vector at Beam   = <0.00, 10.64>
Lcsbm at Beam spacing  = 2.06 in.
Lcebm at Beam edge    = 8.53 in.
(1/omega)Rnsbm at Beam spacing = (1/omega) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * 2.06 * (0.32/1) * 65.00 = 25.34 kips/bolt
(1/omega)Rnebm at Beam edge = (1/omega) * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 8.53 * (0.32/1) * 65.00 = 104.81 kips/bolt
(1/omega)Rndbm on Beam at Bolt Diameter   = (1/omega) * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.88 * (0.32/1) * 65.00 = 21.50 kips/bolt
Beam bearing capacity, (1/omega)Rnbm = min((1/omega)Rnsbm,(1/omega)Rnebm,(1/omega)Rndbm) = min(25.34, 104.81, 21.50) = 21.50 kips/bolt
Ri vector at Shear Plate   = <-0.00, -10.64>
Lcsshpl at Shear Plate spacing  = 2.06 in.
Lceshpl at Shear Plate edge    = 6.78 in.
(1/omega)Rnsshpl at Shear Plate spacing = (1/omega) * hf1 * Lcs * t * Fu = 0.50 * 1.20 * 2.06 * 0.38 * 65.00 = 30.16 kips/bolt
(1/omega)Rneshpl at Shear Plate edge = (1/omega) * hf1 * Lce * t * Fu = 0.50 * 1.20 * 6.78 * 0.38 * 65.00 = 99.18 kips/bolt
(1/omega)Rndshpl on Shear Plate at Bolt Diameter   = (1/omega) * hf2 * db * t * Fu = 0.50 * 2.40 * 0.88 * 0.38 * 65.00 = 25.59 kips/bolt
Shear Plate bearing capacity, (1/omega)Rnshpl = min((1/omega)Rnsshpl,(1/omega)Rneshpl,(1/omega)Rndshpl) = min(30.16, 99.18, 25.59) = 25.59 kips/bolt
(1/omega)Rn = min((1/omega)Rnbm, (1/omega)Rnshpl) = min(21.499, 25.594) = 21.50 kips/bolt
Bolt Shear Demand to Bearing ratio = 21.50 / 10.64 = 2.02

At Row 4, At Column 1:
Ribolt = 14.67 kips
Ri vector at Beam   = <-13.75, 5.12>
Lcsbm at Beam spacing  = na
Lcebm at Beam edge    = 1.53 in.
(1/omega)Rnsbm at Beam spacing = (1/omega) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * na * (0.32/1) * 65.00 = na
(1/omega)Rnebm at Beam edge = (1/omega) * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 1.53 * (0.32/1) * 65.00 = 18.81 kips/bolt
(1/omega)Rndbm on Beam at Bolt Diameter   = (1/omega) * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.88 * (0.32/1) * 65.00 = 21.50 kips/bolt
Beam bearing capacity, (1/omega)Rnbm = min((1/omega)Rnsbm,(1/omega)Rnebm,(1/omega)Rndbm) = min(na, 18.81, 21.50) = 18.81 kips/bolt
Ri vector at Shear Plate   = <13.75, -5.12>
Lcsshpl at Shear Plate spacing  = na
Lceshpl at Shear Plate edge    = 1.27 in.
(1/omega)Rnsshpl at Shear Plate spacing = (1/omega) * hf1 * Lcs * t * Fu = 0.50 * 1.20 * na * 0.38 * 65.00 = na
(1/omega)Rneshpl at Shear Plate edge = (1/omega) * hf1 * Lce * t * Fu = 0.50 * 1.20 * 1.27 * 0.38 * 65.00 = 18.53 kips/bolt
(1/omega)Rndshpl on Shear Plate at Bolt Diameter   = (1/omega) * hf2 * db * t * Fu = 0.50 * 2.40 * 0.88 * 0.38 * 65.00 = 25.59 kips/bolt
Shear Plate bearing capacity, (1/omega)Rnshpl = min((1/omega)Rnsshpl,(1/omega)Rneshpl,(1/omega)Rndshpl) = min(na, 18.53, 25.59) = 18.53 kips/bolt
(1/omega)Rn = min((1/omega)Rnbm, (1/omega)Rnshpl) = min(18.806, 18.533) = 18.53 kips/bolt
Bolt Shear Demand to Bearing ratio = 18.53 / 14.67 = 1.26

At Row 5, At Column 1:
Ribolt = 15.94 kips
Ri vector at Beam   = <-15.67, 2.92>
Lcsbm at Beam spacing  = na
Lcebm at Beam edge    = 1.40 in.
(1/omega)Rnsbm at Beam spacing = (1/omega) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * na * (0.32/1) * 65.00 = na
(1/omega)Rnebm at Beam edge = (1/omega) * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 1.40 * (0.32/1) * 65.00 = 17.19 kips/bolt
(1/omega)Rndbm on Beam at Bolt Diameter   = (1/omega) * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.88 * (0.32/1) * 65.00 = 21.50 kips/bolt
Beam bearing capacity, (1/omega)Rnbm = min((1/omega)Rnsbm,(1/omega)Rnebm,(1/omega)Rndbm) = min(na, 17.19, 21.50) = 17.19 kips/bolt
Ri vector at Shear Plate   = <15.67, -2.92>
Lcsshpl at Shear Plate spacing  = na
Lceshpl at Shear Plate edge    = 1.21 in.
(1/omega)Rnsshpl at Shear Plate spacing = (1/omega) * hf1 * Lcs * t * Fu = 0.50 * 1.20 * na * 0.38 * 65.00 = na
(1/omega)Rneshpl at Shear Plate edge = (1/omega) * hf1 * Lce * t * Fu = 0.50 * 1.20 * 1.21 * 0.38 * 65.00 = 17.67 kips/bolt
(1/omega)Rndshpl on Shear Plate at Bolt Diameter   = (1/omega) * hf2 * db * t * Fu = 0.50 * 2.40 * 0.88 * 0.38 * 65.00 = 25.59 kips/bolt
Shear Plate bearing capacity, (1/omega)Rnshpl = min((1/omega)Rnsshpl,(1/omega)Rneshpl,(1/omega)Rndshpl) = min(na, 17.67, 25.59) = 17.67 kips/bolt
(1/omega)Rn = min((1/omega)Rnbm, (1/omega)Rnshpl) = min(17.188, 17.666) = 17.19 kips/bolt
Bolt Shear Demand to Bearing ratio = 17.19 / 15.94 = 1.08

Min Bolt Shear Demand to Bearing ratio Beam and Shear Plate for vertical shear only
 = min(1.00, 1.35, 1.47, 2.02, 1.26, 1.08) = 1.00

BEARING AT BEAM AND SHEAR PLATE SIDE SUMMARY:
Bearing Capacity at Vertical Shear Load Only, Rbv = Min Bolt Shear Demand to Bearing Ratio * Bolt Shear = 1.00 * 26.72 = 26.72 kips
Rbv = 26.72 kips >= V = 24.00 kips (OK)

Web Depth = d - [Top Cope Depth] - [Bottom Cope Depth] = 17.9 - 0 - 0 = 17.9 in.
Gross Area (Shear) = [Web Depth] * tw = 17.90 * 0.32 = 5.64 in^2
Net Shear Area (Shear) = ([Web Depth] - ([# rows] * [Diameter + 0.0625])) * tw 
    = (17.90 - (5 * 1.00)) * 0.32 = 4.06 in^2

Using Eq.J4-3:
Shear Yielding = (1/omega) * 0.6 * Fybeam * [Gross Area] = 0.67 * 0.6 * 50.00 * 5.64 = 112.77 kips

Using Eq.J4-4:
Shear Rupture = (1/omega) * 0.6 * Fubeam * [Net Area] = 0.50 * 0.6 * 65.00 * 4.06 = 79.24 kips


Block Shear

Using Eq.J4-5:
Block Shear = {(1/omega) * ((0.6 * Fu * Anv) + (Ubs * Fu * Ant))} <= {(1/omega) * ((0.6 * Fy * Agv) + (Ubs * Fu * Ant))}

Block Shear not required.

Gross Area = 0.38 * 14.50 = 5.44 in^2
Net Area = (14.50 - (5 *(0.94 + 1/16))) * 0.38 = 3.56 in^2

Using Eq.J4-3:
Shear Yielding = (1/omega) * 0.6 * Fypl * [Gross Area] = 0.67 * 0.6 * 50.00 * 5.44 = 108.75 kips

Using Eq.J4-4:
Shear Rupture = (1/omega) * 0.6 * Fupl * [Net Area] = 0.50 * 0.6 * 65.00 * 3.56 = 69.47 kips


Block Shear

Using Eq.J4-5:
Block Shear = {(1/omega) * ((0.6 * Fu * Anv) + (Ubs * Fu * Ant))} <= {(1/omega) * ((0.6 * Fy * Agv) + (Ubs * Fu * Ant))}
Block 1 (Shear): 
Gross Shear Length = (14.5 - 1.25) = 13.25 in.
Net Shear Length = 13.2 - (4.5 * (0.938 + 0.0625)) = 8.75 in.
Gross Tension Length = (0 + 1.75) = 1.75 in.
Net Tension Length = 1.75 - (0.5 * (1.12 + 0.0625)) = 1.16 in.
1. (1/omega) * [material thickness] * ((0.60 * Fupl* [net shear length]) + (Ubs * Fupl * [net tension length])) 
    = 0.50 * 0.38 * ((0.60 * 65.00 * 8.75) + (1.00 * 65.00 * 1.16)) = 78.08 kips
2. (1/omega) * [material thickness] * ((0.60 * Fypl * [gross shear length]) + (Ubs * Fupl * [net tension length])) 
    = 0.50 * 0.38 * ((0.60 * 50.00 * 13.25) + (1.00 * 65.00 * 1.16)) = 88.62 kips
Block Shear = 78.08 kips

78.08 kips >= Vbm = 24.00 kips (OK)

Flexural and Buckling Strength:

Eccentricity at first line of bolts, e = 10.12 in.
Zgross = 19.71 in^3
Znet   = 12.87 in^3
Sgross = 13.14 in^3
Snet   = 8.49 in^3

Using Eq. 9-4
Flexural Rupture = (1/omega) * Fu * Znet / e = 0.50 * 65.00 * 12.87 / 10.12 = 41.30 kips


Using Eq. 9-14 through 9-18, Fcr = Fy * Q
tw = 0.38 in.
ho = 14.50 in.
c = 10.12 in.
lambda = (ho * Fy ^ 0.5) / ( 10 * tw * ( 475.00 + 280.00 * (ho / c)^2 ) ^0.5 ) = 
 = 14.50 * 50.00^0.5 / (10 * 0.38 * (475.00 + 280.00 * (14.50/10.12)^2 )^0.5) = 0.84
When 0.70 < lambda <= 1.41, Q=1.34 - 0.49 * lambda
Q = 0.93
Fcrmin =1/omega * Fcr = 0.60 * 50.00 * 0.93 = 27.89 ksi

Using Eq. 9-6
Buckling = Fcr * Sgross / e = 27.89 * 13.14 / 10.12 = 36.20 kips

Interaction Check of Flexural Yielding, Per AISC 10-5: 
Eccentricity at CG of Bolt Group, e = 10.12 in.
Zgross = 19.71
Znet = 12.87
Mr = Vr * e = 24.00 * 10.12 = 243.00 kips-in
Mc = 1/omega * Mn = 1/omega * Fy * Zgross = 0.60 * 50.00 * 19.71 = 591.33 kips-in
Vr = 24.00 kips
Vc = 1/omega * Vn = 1/omega * 0.60 * Fy * Ag = 0.67 * 0.60 * 50.00 * 5.44 = 108.75 kips
Interaction due to moment and shear, (Vr/Vc)^2 + (Mr/Mc)^2 <= 1.0
(Vr/Vc)^2 + (Mr/Mc)^2 = (24.00 / 108.75)^2 + (243.00 / 591.33)^2 = 0.22 <= 1  (OK)

Note: Mn <= 1.6My by inspection

MAXIMUM PLATE THICKNESS:
No of bolt columns = 1
tp  < = db/2 + 1/16 = 0.375 <= 0.5 OK
tw  < = db/2 + 1/16 = 0.315 <= 0.5 OK
Leh(plate) >= 2 * db = 1.75 >= 1.75 OK
Leh(bm) >= 2 * db = 1.86575 >= 1.75 OK
Maximum Plate Thickness is Not a Limiting Criteria.

STABILIZER PLATE:

Available Strength to Resist Lateral Displacement:
Using Eq. 10-6 (14th Ed.):
Rn/omega = 1500.00  * 3.14159 * L * tp^3 / a^2 = 0.60 * 1500.00 * 3.14159 * 14.50 * 0.38^3 / 10.12^2 = 21.09 kips
Stabilizer Plate Required for lateral displacement

Torsional Strength:
Using Eq. 10-8 and Eq. 10-7 (14th Ed.):
Required, Mta or Mtu = Ra * (tw + tp) /2 = 24.00 * ((0.31 + 0.38) / 2) = 8.25 kips-in
Lateral Shear Strength of Shear Plate, Mtn (no slab) = [1/omega*(0.6*Fyp)-(Ra/(L*tp))] *L*tp^2/2 =  ((0.67 * 0.6 * 50.00) - (24.00 / (14.50 * 0.38))) * 0.5 * 14.50 * 0.38^2 = 15.89 kips-in
Stabilizer Plate Not Required for torsional strength

WELD:

 Weld Requirements:

At shear only case: 
Weld Length for shear, Lv = 13.000 in.
Shear Load per inch per weld, fv = R/Lv/2 = 24.000 / 13.000 / 2 = 0.923 kips/in/ weld 
theta = 0 deg.
cPhi  = 1.0 + 0.5 * sin(0)^1.5 = 1.000
Weld Coefficient = 0.6 * 70.000 * 1.000 * 1.000 * (2^0.5/2)*(1/16) = 1.856
Required weld size, Dv = fv/ (1/omega * coeff) = 0.923 / (0.500 * 1.856) = 0.995/16

Minimum fillet weld size : 
   At shear only load case = 0.06 in.
   per Table J2.4     = 0.19 in.
   5/8tp              = 0.23 in.
   user preference    = 0.25 in.

Dmax1 (using eqn 9-3)
 = tshpl * Fushpl / ( Fexx * C1 * 0.088)
 = 0.375 * 65.000 / ( 70.000 * 1.000 * 0.088 ) 
 = 3.940 
Dmax2 (using eqn 9-3)
 = twsupport * Fusupport / ( Fexx * C1 * 0.088 )
 = 0.830 * 65.000 / ( 70.000 * 1.000 * 0.088 ) 
 = 8.720 
Dmax3 = project max fillet weld = 12.000
Dmax=min(Dmax1, Dmax2, Dmax3) = min(3.940, 8.720, 12.000)
 = 3.940 

Use weld size
D1 = 4.00
D2 = 4.00

Weld Strength :

Vertical weld capacity during shear only load, 1/omega * Rnv1 = 0.50 * 1.86 * 13.00 * (3.94 + 3.94) = 95.06 kips

95.06 kips >= Vbm = 24.00 kips (OK)