bb.2bb.s.01433.01433

DOUBLE ANGLES Bolted to Beam, Bolted to Support CONNECTION SUMMARY

Girder profile: W18X40
Filler Beam profile: W12X19
Slope: 0.00 deg.
Support Slope: 0.64 deg.
Skew: 90.00
Vertical Offset: -1.33
Horizontal Offset: 0.00
Span: 20.00 ft.
Reaction, V: 14.00 kips
Shear Capacity, Rn: 61.87 kips
Design/Reference according to AISC 14th Ed. - LRFD
Beam material grade: A992
Support material grade: A992
Angle material grade: A529-GR.50
Angle1 Profile: L4X3-1/2X3/8
       Length = 8.00 in.
       Beam side bolts: 3 rows x 1 column 0.75 in. Diameter A325N_TC bolts
       Beam side bolt vertical spacing: 3.00 in.
       Support side bolts: 3 rows x 1 column 0.75 in. Diameter A325N_TC bolts
       Support side bolt vertical spacing: 3.00 in.
Angle2 Profile: L4X3-1/2X3/8
       Length = 8.00 in.
       Beam side bolts: 3 rows x 1 column 0.75 in. Diameter A325N_TC bolts
       Beam side bolt vertical spacing: 3.00 in.
       Support side bolts: 3 rows x 1 column 0.75 in. Diameter A325N_TC bolts
       Support side bolt vertical spacing: 3.00 in.

Configuration Geometry:

Beam setback = 0.50 in.
Edge distance at vertical edge of beam: 1.50 in.

Horizontal distance to first hole: 2.00 in.

Bolted Angle Leg At Beam : 
Angle 1 Leg Distances : 
   Down distance from top of filler beam flange : 3.00 in.
   Edge distance at vertical edge : 1.50 in.
   Edge distance at top edge : 1.00 in.
   Edge distance at bottom edge : 1.00 in.

Angle 2 Leg Distances : 
   Down distance from top of filler beam flange : 3.00 in.
   Edge distance at vertical edge : 1.50 in.
   Edge distance at top edge : 1.00 in.
   Edge distance at bottom edge : 1.00 in.

Bolted Angle Leg At Support : 
Angle 1 Leg Distances : 
   Down distance from top of filler beam flange : 3.00 in.
   Gage at Bolt : 2.75 in.
   Edge distance at vertical edge : 1.37 in.
   Edge distance at top edge : 1.00 in.
   Edge distance at bottom edge : 1.00 in.

Angle 2 Leg Distances : 
   Down distance from top of filler beam flange : 3.00 in.
   Gage at Bolt : 2.75 in.
   Edge distance at vertical edge : 1.37 in.
   Edge distance at top edge : 1.00 in.
   Edge distance at bottom edge : 1.00 in.

Holes in Beam Web : STD diameter = 0.81 in.
Holes in Beam Angle Leg : STD diameter = 0.81 in.
Holes in Support Girder : STD diameter = 0.81 in.
Holes in Support Angle Leg : SSL slot width = 0.81 in., slot length = 1.00 in.

BOLT SHEAR CAPACITY AT BEAM AND ANGLE 1 SIDE:
At Angle 1 side:
Bolt Shear Capacity at Shear Load Only:
C = no of bolts = 3.00
Using Table 7-1 to determine (phi)rn:
(phi)Rn = (phi)rn * C = 17.89 * 3.00 = 53.68 kips


BOLT SHEAR CAPACITY AT BEAM AND ANGLE 2 SIDE:
At Angle 2 side:
Bolt Shear Capacity at Shear Load Only:
C = no of bolts = 3.00
Using Table 7-1 to determine (phi)rn:
(phi)Rn = (phi)rn * C = 17.89 * 3.00 = 53.68 kips


Total Vertical Bolt Shear Capacity = 
 = min(Shear Load Only at Angle 1 side/gage1 ratio, 
       Shear Load Only at Angle 2 side/gage2 ratio) = 
 = min(53.68/0.50, 53.68/0.50) = 107.36 kips
107.36 kips >= Reaction V = 14.00 kips (OK)

BOLT SHEAR CAPACITY AT SUPPORT AND ANGLE 1 SIDE:
Bolt Shear Capacity at Shear Load Only:
Gage ratio:  gage1 ratio = gage2 / (gage1 + gage2) = 2.75 / (2.75 + 2.75) = 0.50
Required tension stress (frt) = gage1 ratio * axial reaction    / shared bolt row count / bolt area  = 0.50 * 0.00 / 3 / 0.44 = 0.00 ksi
Required shear stress   (frv) = gage1 ratio * vertical reaction / bolt row count  / bolt area  = 0.50 * 14.00 / 3 / 0.44 = 5.28 ksi
C = no of bolts = 3.00
Using Table 7-1 to determine (phi)rn:
(phi)Rn = (phi)rn * C = 17.89 * 3.00 = 53.68 kips


BOLT SHEAR CAPACITY AT SUPPORT AND ANGLE 2 SIDE:
Bolt Shear Capacity at Shear Load Only:
Gage ratio:  gage2 ratio = gage1 / (gage1 + gage2) = 2.75 / (2.75 + 2.75) = 0.50
Required tension stress (frt) = gage2 ratio * axial reaction    / shared bolt row count / bolt area  = 0.50 * 0.00 / 3 / 0.44 = 0.00 ksi
Required shear stress   (frv) = gage2 ratio * vertical reaction / bolt row count  / bolt area  = 0.50 * 14.00 / 3 / 0.44 = 5.28 ksi
C = no of bolts = 3.00
Using Table 7-1 to determine (phi)rn:
(phi)Rn = (phi)rn * C = 17.89 * 3.00 = 53.68 kips


Vertical Bolt Shear Capacity at Support and Angle 1 = 
 = Shear Load Only Angle 1 side/gage1 ratio = 53.68/0.50 = 107.36 kips
Vertical Bolt Shear Capacity at Support and Angle 2 = 
 = Shear Load Only Angle 2 side/gage2 ratio = 53.68/0.50 = 107.36 kips
Total Support Side Bolt Shear Capacity = min(107.36, 107.36) = 107.36 kips
107.36 kips >= Reaction V = 14.00 kips (OK)

BOLT BEARING AT BEAM AND ANGLE 1 SIDE
Vertical Shear Only Load Case:
At Row 1, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcsbm at Beam spacing  = 2.19 in.
Lcebm at Beam edge    = 2.59 in.
(phi)Rnsbm at Beam spacing = (phi) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.75 * 1.20 * 2.19 * (0.23/2) * 65.00 = 15.04 kips/bolt
(phi)Rnebm at Beam edge = (phi) * hf1 * Lce * (tw/# shear planes) * Fu = 0.75 * 1.20 * 2.59 * (0.23/2) * 65.00 = 17.83 kips/bolt
(phi)Rndbm on Beam at Bolt Diameter   = (phi) * hf2 * db * (tw/# shear planes) * Fu = 0.75 * 2.40 * 0.75 * (0.23/2) * 65.00 = 10.31 kips/bolt
Beam bearing capacity, (phi)Rnbm = min((phi)Rnsbm,(phi)Rnebm,(phi)Rndbm) = min(15.04, 17.83, 10.31) = 10.31 kips/bolt
Lcsang1 at Angle 1 spacing  = 2.19 in.
Lceang1 at Angle 1 edge    = 6.59 in.
(phi)Rnsang1 at Angle 1 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang1 at Angle 1 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 6.59 * 0.38 * 65.00 = 144.65 kips/bolt
(phi)Rndang1 on Angle 1 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 1 bearing capacity, (phi)Rnang1 = min((phi)Rnsang1,(phi)Rneang1,(phi)Rndang1) = min(47.99, 144.65, 32.91) = 32.91 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnbm, (phi)Rnang1) = min(17.89, 10.31, 32.91) = 10.31 kips/bolt

At Row 2, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcsbm at Beam spacing  = 2.19 in.
Lcebm at Beam edge    = 5.59 in.
(phi)Rnsbm at Beam spacing = (phi) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.75 * 1.20 * 2.19 * (0.23/2) * 65.00 = 15.04 kips/bolt
(phi)Rnebm at Beam edge = (phi) * hf1 * Lce * (tw/# shear planes) * Fu = 0.75 * 1.20 * 5.59 * (0.23/2) * 65.00 = 38.45 kips/bolt
(phi)Rndbm on Beam at Bolt Diameter   = (phi) * hf2 * db * (tw/# shear planes) * Fu = 0.75 * 2.40 * 0.75 * (0.23/2) * 65.00 = 10.31 kips/bolt
Beam bearing capacity, (phi)Rnbm = min((phi)Rnsbm,(phi)Rnebm,(phi)Rndbm) = min(15.04, 38.45, 10.31) = 10.31 kips/bolt
Lcsang1 at Angle 1 spacing  = 2.19 in.
Lceang1 at Angle 1 edge    = 3.59 in.
(phi)Rnsang1 at Angle 1 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang1 at Angle 1 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 3.59 * 0.38 * 65.00 = 78.84 kips/bolt
(phi)Rndang1 on Angle 1 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 1 bearing capacity, (phi)Rnang1 = min((phi)Rnsang1,(phi)Rneang1,(phi)Rndang1) = min(47.99, 78.84, 32.91) = 32.91 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnbm, (phi)Rnang1) = min(17.89, 10.31, 32.91) = 10.31 kips/bolt

At Row 3, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcsbm at Beam spacing  = 2.19 in.
Lcebm at Beam edge    = 8.59 in.
(phi)Rnsbm at Beam spacing = (phi) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.75 * 1.20 * 2.19 * (0.23/2) * 65.00 = 15.04 kips/bolt
(phi)Rnebm at Beam edge = (phi) * hf1 * Lce * (tw/# shear planes) * Fu = 0.75 * 1.20 * 8.59 * (0.23/2) * 65.00 = 59.07 kips/bolt
(phi)Rndbm on Beam at Bolt Diameter   = (phi) * hf2 * db * (tw/# shear planes) * Fu = 0.75 * 2.40 * 0.75 * (0.23/2) * 65.00 = 10.31 kips/bolt
Beam bearing capacity, (phi)Rnbm = min((phi)Rnsbm,(phi)Rnebm,(phi)Rndbm) = min(15.04, 59.07, 10.31) = 10.31 kips/bolt
Lcsang1 at Angle 1 spacing  = 2.19 in.
Lceang1 at Angle 1 edge    = 0.59 in.
(phi)Rnsang1 at Angle 1 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang1 at Angle 1 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 0.59 * 0.38 * 65.00 = 13.03 kips/bolt
(phi)Rndang1 on Angle 1 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 1 bearing capacity, (phi)Rnang1 = min((phi)Rnsang1,(phi)Rneang1,(phi)Rndang1) = min(47.99, 13.03, 32.91) = 13.03 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnbm, (phi)Rnang1) = min(17.89, 10.31, 13.03) = 10.31 kips/bolt

Bearing Capacity at Beam and Angle for vertical shear only
 = Sum{ Bearing At [(Row)i,(Column)i] }
 = 10.31 + 10.31 + 10.31 = 30.93 kips

BOLT BEARING AT BEAM AND ANGLE 2 SIDE
Vertical Shear Only Load Case:
At Row 1, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcsbm at Beam spacing  = 2.19 in.
Lcebm at Beam edge    = 2.59 in.
(phi)Rnsbm at Beam spacing = (phi) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.75 * 1.20 * 2.19 * (0.23/2) * 65.00 = 15.04 kips/bolt
(phi)Rnebm at Beam edge = (phi) * hf1 * Lce * (tw/# shear planes) * Fu = 0.75 * 1.20 * 2.59 * (0.23/2) * 65.00 = 17.83 kips/bolt
(phi)Rndbm on Beam at Bolt Diameter   = (phi) * hf2 * db * (tw/# shear planes) * Fu = 0.75 * 2.40 * 0.75 * (0.23/2) * 65.00 = 10.31 kips/bolt
Beam bearing capacity, (phi)Rnbm = min((phi)Rnsbm,(phi)Rnebm,(phi)Rndbm) = min(15.04, 17.83, 10.31) = 10.31 kips/bolt
Lcsang2 at Angle 2 spacing  = 2.19 in.
Lceang2 at Angle 2 edge    = 6.59 in.
(phi)Rnsang2 at Angle 2 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang2 at Angle 2 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 6.59 * 0.38 * 65.00 = 144.65 kips/bolt
(phi)Rndang2 on Angle 2 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 2 bearing capacity, (phi)Rnang2 = min((phi)Rnsang2,(phi)Rneang2,(phi)Rndang2) = min(47.99, 144.65, 32.91) = 32.91 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnbm, (phi)Rnang2) = min(17.89, 10.31, 32.91) = 10.31 kips/bolt

At Row 2, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcsbm at Beam spacing  = 2.19 in.
Lcebm at Beam edge    = 5.59 in.
(phi)Rnsbm at Beam spacing = (phi) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.75 * 1.20 * 2.19 * (0.23/2) * 65.00 = 15.04 kips/bolt
(phi)Rnebm at Beam edge = (phi) * hf1 * Lce * (tw/# shear planes) * Fu = 0.75 * 1.20 * 5.59 * (0.23/2) * 65.00 = 38.45 kips/bolt
(phi)Rndbm on Beam at Bolt Diameter   = (phi) * hf2 * db * (tw/# shear planes) * Fu = 0.75 * 2.40 * 0.75 * (0.23/2) * 65.00 = 10.31 kips/bolt
Beam bearing capacity, (phi)Rnbm = min((phi)Rnsbm,(phi)Rnebm,(phi)Rndbm) = min(15.04, 38.45, 10.31) = 10.31 kips/bolt
Lcsang2 at Angle 2 spacing  = 2.19 in.
Lceang2 at Angle 2 edge    = 3.59 in.
(phi)Rnsang2 at Angle 2 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang2 at Angle 2 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 3.59 * 0.38 * 65.00 = 78.84 kips/bolt
(phi)Rndang2 on Angle 2 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 2 bearing capacity, (phi)Rnang2 = min((phi)Rnsang2,(phi)Rneang2,(phi)Rndang2) = min(47.99, 78.84, 32.91) = 32.91 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnbm, (phi)Rnang2) = min(17.89, 10.31, 32.91) = 10.31 kips/bolt

At Row 3, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcsbm at Beam spacing  = 2.19 in.
Lcebm at Beam edge    = 8.59 in.
(phi)Rnsbm at Beam spacing = (phi) * hf1 * Lcs * (tw/# shear planes) * Fu = 0.75 * 1.20 * 2.19 * (0.23/2) * 65.00 = 15.04 kips/bolt
(phi)Rnebm at Beam edge = (phi) * hf1 * Lce * (tw/# shear planes) * Fu = 0.75 * 1.20 * 8.59 * (0.23/2) * 65.00 = 59.07 kips/bolt
(phi)Rndbm on Beam at Bolt Diameter   = (phi) * hf2 * db * (tw/# shear planes) * Fu = 0.75 * 2.40 * 0.75 * (0.23/2) * 65.00 = 10.31 kips/bolt
Beam bearing capacity, (phi)Rnbm = min((phi)Rnsbm,(phi)Rnebm,(phi)Rndbm) = min(15.04, 59.07, 10.31) = 10.31 kips/bolt
Lcsang2 at Angle 2 spacing  = 2.19 in.
Lceang2 at Angle 2 edge    = 0.59 in.
(phi)Rnsang2 at Angle 2 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang2 at Angle 2 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 0.59 * 0.38 * 65.00 = 13.03 kips/bolt
(phi)Rndang2 on Angle 2 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 2 bearing capacity, (phi)Rnang2 = min((phi)Rnsang2,(phi)Rneang2,(phi)Rndang2) = min(47.99, 13.03, 32.91) = 13.03 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnbm, (phi)Rnang2) = min(17.89, 10.31, 13.03) = 10.31 kips/bolt

Bearing Capacity at Beam and Angle for vertical shear only
 = Sum{ Bearing At [(Row)i,(Column)i] }
 = 10.31 + 10.31 + 10.31 = 30.93 kips


BEARING AT BEAM AND ANGLE SIDE SUMMARY:
Bearing Capacity at Vertical Shear Load Only, Rbv
 = Min(Sum{ Bearing at side 1  [(Row)i,(Column)i] } / gage1 ratio, 
       Sum{ Bearing at side 2  [(Row)i,(Column)i] } / gage2 ratio )
 = Min( 30.93/ 0.50, 30.93/ 0.50 ) = 61.87 kips
Rbv = 61.87 kips >= Reaction V = 14.00 kips (OK)


BOLT BEARING AT SUPPORT AND ANGLE 1 SIDE
Vertical Shear Only Load Case:
At Row 1, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcssupp at Support spacing  = 2.19 in.
Lcesupp at Support edge    = 13.13 in.
(phi)Rnssupp at Support spacing = (phi) * hf1 * Lcs * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 2.19 * (0.32/2) * 65.00 = 20.16 kips/bolt
(phi)Rnesupp at Support edge = (phi) * hf1 * Lce * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 13.13 * (0.32/2) * 65.00 = 121.00 kips/bolt
(phi)Rndsupp on Support at Bolt Diameter   = (phi) * hf2 * db * (twsup/# bolt sides supported) * Fu = 0.75 * 2.40 * 0.75 * (0.32/2) * 65.00 = 13.82 kips/bolt
Support bearing capacity, (phi)Rnsupp = min((phi)Rnssupp,(phi)Rnesupp,(phi)Rndsupp) = min(20.16, 121.00, 13.82) = 13.82 kips/bolt
Lcsang1 at Angle 1 spacing  = 2.19 in.
Lceang1 at Angle 1 edge    = 0.59 in.
(phi)Rnsang1 at Angle 1 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang1 at Angle 1 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 0.59 * 0.38 * 65.00 = 13.03 kips/bolt
(phi)Rndang1 on Angle 1 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 1 bearing capacity, (phi)Rnang1 = min((phi)Rnsang1,(phi)Rneang1,(phi)Rndang1) = min(47.99, 13.03, 32.91) = 13.03 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnsupp, (phi)Rnang1) = min(17.89, 13.82, 13.03) = 13.03 kips/bolt

At Row 2, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcssupp at Support spacing  = 2.19 in.
Lcesupp at Support edge    = 10.13 in.
(phi)Rnssupp at Support spacing = (phi) * hf1 * Lcs * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 2.19 * (0.32/2) * 65.00 = 20.16 kips/bolt
(phi)Rnesupp at Support edge = (phi) * hf1 * Lce * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 10.13 * (0.32/2) * 65.00 = 93.35 kips/bolt
(phi)Rndsupp on Support at Bolt Diameter   = (phi) * hf2 * db * (twsup/# bolt sides supported) * Fu = 0.75 * 2.40 * 0.75 * (0.32/2) * 65.00 = 13.82 kips/bolt
Support bearing capacity, (phi)Rnsupp = min((phi)Rnssupp,(phi)Rnesupp,(phi)Rndsupp) = min(20.16, 93.35, 13.82) = 13.82 kips/bolt
Lcsang1 at Angle 1 spacing  = 2.19 in.
Lceang1 at Angle 1 edge    = 3.59 in.
(phi)Rnsang1 at Angle 1 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang1 at Angle 1 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 3.59 * 0.38 * 65.00 = 78.84 kips/bolt
(phi)Rndang1 on Angle 1 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 1 bearing capacity, (phi)Rnang1 = min((phi)Rnsang1,(phi)Rneang1,(phi)Rndang1) = min(47.99, 78.84, 32.91) = 32.91 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnsupp, (phi)Rnang1) = min(17.89, 13.82, 32.91) = 13.82 kips/bolt

At Row 3, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcssupp at Support spacing  = 2.19 in.
Lcesupp at Support edge    = 7.13 in.
(phi)Rnssupp at Support spacing = (phi) * hf1 * Lcs * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 2.19 * (0.32/2) * 65.00 = 20.16 kips/bolt
(phi)Rnesupp at Support edge = (phi) * hf1 * Lce * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 7.13 * (0.32/2) * 65.00 = 65.71 kips/bolt
(phi)Rndsupp on Support at Bolt Diameter   = (phi) * hf2 * db * (twsup/# bolt sides supported) * Fu = 0.75 * 2.40 * 0.75 * (0.32/2) * 65.00 = 13.82 kips/bolt
Support bearing capacity, (phi)Rnsupp = min((phi)Rnssupp,(phi)Rnesupp,(phi)Rndsupp) = min(20.16, 65.71, 13.82) = 13.82 kips/bolt
Lcsang1 at Angle 1 spacing  = 2.19 in.
Lceang1 at Angle 1 edge    = 6.59 in.
(phi)Rnsang1 at Angle 1 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang1 at Angle 1 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 6.59 * 0.38 * 65.00 = 144.65 kips/bolt
(phi)Rndang1 on Angle 1 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 1 bearing capacity, (phi)Rnang1 = min((phi)Rnsang1,(phi)Rneang1,(phi)Rndang1) = min(47.99, 144.65, 32.91) = 32.91 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnsupp, (phi)Rnang1) = min(17.89, 13.82, 32.91) = 13.82 kips/bolt

Bearing Capacity at Support and Angle 1 for vertical shear only
 = Sum{ Bearing At [(Row)i,(Column)i] }
 = 13.03 + 13.82 + 13.82 = 40.67 kips

BOLT BEARING AT SUPPORT AND ANGLE 2 SIDE
Vertical Shear Only Load Case:
At Row 1, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcssupp at Support spacing  = 2.19 in.
Lcesupp at Support edge    = 13.19 in.
(phi)Rnssupp at Support spacing = (phi) * hf1 * Lcs * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 2.19 * (0.32/2) * 65.00 = 20.16 kips/bolt
(phi)Rnesupp at Support edge = (phi) * hf1 * Lce * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 13.19 * (0.32/2) * 65.00 = 121.56 kips/bolt
(phi)Rndsupp on Support at Bolt Diameter   = (phi) * hf2 * db * (twsup/# bolt sides supported) * Fu = 0.75 * 2.40 * 0.75 * (0.32/2) * 65.00 = 13.82 kips/bolt
Support bearing capacity, (phi)Rnsupp = min((phi)Rnssupp,(phi)Rnesupp,(phi)Rndsupp) = min(20.16, 121.56, 13.82) = 13.82 kips/bolt
Lcsang2 at Angle 2 spacing  = 2.19 in.
Lceang2 at Angle 2 edge    = 0.59 in.
(phi)Rnsang2 at Angle 2 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang2 at Angle 2 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 0.59 * 0.38 * 65.00 = 13.03 kips/bolt
(phi)Rndang2 on Angle 2 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 2 bearing capacity, (phi)Rnang2 = min((phi)Rnsang2,(phi)Rneang2,(phi)Rndang2) = min(47.99, 13.03, 32.91) = 13.03 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnsupp, (phi)Rnang2) = min(17.89, 13.82, 13.03) = 13.03 kips/bolt

At Row 2, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcssupp at Support spacing  = 2.19 in.
Lcesupp at Support edge    = 10.19 in.
(phi)Rnssupp at Support spacing = (phi) * hf1 * Lcs * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 2.19 * (0.32/2) * 65.00 = 20.16 kips/bolt
(phi)Rnesupp at Support edge = (phi) * hf1 * Lce * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 10.19 * (0.32/2) * 65.00 = 93.92 kips/bolt
(phi)Rndsupp on Support at Bolt Diameter   = (phi) * hf2 * db * (twsup/# bolt sides supported) * Fu = 0.75 * 2.40 * 0.75 * (0.32/2) * 65.00 = 13.82 kips/bolt
Support bearing capacity, (phi)Rnsupp = min((phi)Rnssupp,(phi)Rnesupp,(phi)Rndsupp) = min(20.16, 93.92, 13.82) = 13.82 kips/bolt
Lcsang2 at Angle 2 spacing  = 2.19 in.
Lceang2 at Angle 2 edge    = 3.59 in.
(phi)Rnsang2 at Angle 2 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang2 at Angle 2 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 3.59 * 0.38 * 65.00 = 78.84 kips/bolt
(phi)Rndang2 on Angle 2 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 2 bearing capacity, (phi)Rnang2 = min((phi)Rnsang2,(phi)Rneang2,(phi)Rndang2) = min(47.99, 78.84, 32.91) = 32.91 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnsupp, (phi)Rnang2) = min(17.89, 13.82, 32.91) = 13.82 kips/bolt

At Row 3, At Column 1:
(phi)Rnbolt = 17.89 kips
Lcssupp at Support spacing  = 2.19 in.
Lcesupp at Support edge    = 7.19 in.
(phi)Rnssupp at Support spacing = (phi) * hf1 * Lcs * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 2.19 * (0.32/2) * 65.00 = 20.16 kips/bolt
(phi)Rnesupp at Support edge = (phi) * hf1 * Lce * (twsup/# bolt sides supported) * Fu = 0.75 * 1.20 * 7.19 * (0.32/2) * 65.00 = 66.28 kips/bolt
(phi)Rndsupp on Support at Bolt Diameter   = (phi) * hf2 * db * (twsup/# bolt sides supported) * Fu = 0.75 * 2.40 * 0.75 * (0.32/2) * 65.00 = 13.82 kips/bolt
Support bearing capacity, (phi)Rnsupp = min((phi)Rnssupp,(phi)Rnesupp,(phi)Rndsupp) = min(20.16, 66.28, 13.82) = 13.82 kips/bolt
Lcsang2 at Angle 2 spacing  = 2.19 in.
Lceang2 at Angle 2 edge    = 6.59 in.
(phi)Rnsang2 at Angle 2 spacing = (phi) * hf1 * Lcs * t * Fu = 0.75 * 1.20 * 2.19 * 0.38 * 65.00 = 47.99 kips/bolt
(phi)Rneang2 at Angle 2 edge = (phi) * hf1 * Lce * t * Fu = 0.75 * 1.20 * 6.59 * 0.38 * 65.00 = 144.65 kips/bolt
(phi)Rndang2 on Angle 2 at Bolt Diameter   = (phi) * hf2 * db * t * Fu = 0.75 * 2.40 * 0.75 * 0.38 * 65.00 = 32.91 kips/bolt
Angle 2 bearing capacity, (phi)Rnang2 = min((phi)Rnsang2,(phi)Rneang2,(phi)Rndang2) = min(47.99, 144.65, 32.91) = 32.91 kips/bolt
(phi)Rn = min((phi)Rnbolt, (phi)Rnsupp, (phi)Rnang2) = min(17.89, 13.82, 32.91) = 13.82 kips/bolt

Bearing Capacity at Support and Angle 2 for vertical shear only
 = Sum{ Bearing At [(Row)i,(Column)i] }
 = 13.03 + 13.82 + 13.82 = 40.67 kips

BEARING AT SUPPORT AND ANGLES SUMMARY:
Bearing Capacity at Vertical Shear Load Only, Rbv1 = Sum{ [(Row)i,(Column)i] } / gage1 ratio = 40.67 / 0.50 = 81.34 kips
Bearing Capacity at Vertical Shear Load Only, Rbv2 = Sum{ [(Row)i,(Column)i] } / gage2 ratio = 40.67 / 0.50 = 81.34 kips
Overall vertical Bearing Capacity Rbv = min(Rbv1, Rbv2) = min(81.34, 81.34) = 81.34 kips
81.34 kips >= 14.00 kips (OK)

Web Depth = d - [Top Cope Depth] - [Bottom Cope Depth] = 12.20 - 0.00 - 0.00 = 12.20 in.

Using AISC 14th Ed. Equation J4-3
Gross Area (Shear), Agross = [Web Depth] * tw = 12.20 * 0.23 = 2.87 in^2
Shear Yielding, (phi)Vny = (phi) * 0.6 * Fybeam * Agross = 1.00 * 0.6 * 50.00 * 2.87 = 86.01 kips

Using AISC 14th Ed. Equation J4-4
Net Area (Shear), Anet = ([Web Depth] - ([# rows] * [Diameter + 0.06])) * tw 
    = (12.20 - (3 * 0.88)) * 0.23 = 2.25 in^2
Shear Rupture, (phi)Vnu = (phi) * 0.6 * Fubeam * Anet = 0.75 * 0.6 * 65.00 * 2.25 = 65.82 kips


Check Horizontal Block Shear

Using AISC 14th Ed. Equation J4-5
Block Shear = {(phi) * ((0.6 * Fu * Anv) + (Ubs * Fu * Ant))} <= {(phi) * ((0.6 * Fy * Agv) + (Ubs * Fu * Ant))}

Block Shear for Axial T/C is not required.

Angle1 

Support Angle Leg 


Using AISC 14th Ed. Equation J4-3
Gross Area, Ag = 0.38 * 8.00 = 3.00 in^2
Shear Yielding, (phi)Vny = (phi) * 0.6 * Fya * Ag = 1.00 * 0.6 * 50.00 * 3.00 = 90.00 kips

Using AISC 14th Ed. Equation J4-4
Net Area, An = (8.00 - (3 * (0.81 + 1/16))) * 0.38 = 2.02 in^2
Shear Rupture, (phi)Vnu = (phi) * 0.6 * Fua * An = 0.75 * 0.6 * 65.00 * 2.02 = 58.96 kips


Check Vertical Block Shear

Using AISC 14th Ed. Equation J4-5
Block Shear = {(phi) * ((0.6 * Fu * Anv) + (Ubs * Fu * Ant))} <= {(phi) * ((0.6 * Fy * Agv) + (Ubs * Fu * Ant))}

Block 1 (Shear): 
Gross Shear Length = (8.00 - 1.00) = 7.00 in.
Net Shear Length = 7.00 - (2.50 * (0.81 + 1/16)) = 4.81 in.
Gross Tension Length = [edge dist.] = 1.37 in.
Net Tension Length = (1.37 - (1.00 + 1/16)/2) = 0.84 in.
1. (phi) * [material thickness] * ((0.60 * Fua* [net shear length]) + (Ubs * Fua * [net tension length])) 
    = 0.75 * 0.38 * ((0.60 * 65.00 * 4.81) + (1.00 * 65.00 * 0.84)) = 68.08 kips
2. (phi) * [material thickness] * ((0.60 * Fya * [gross shear length]) + (Ubs * Fua * [net tension length])) 
    = 0.75 * 0.38 * ((0.60 * 50.00 * 7.00) + (1.00 * 65.00 * 0.84)) = 74.35 kips
Block Shear = 68.08 kips

Beam Angle Leg 


Using AISC 14th Ed. Equation J4-3
Gross Area, Ag = 0.38 * 8.00 = 3.00 in^2
Shear Yielding, (phi)Vny = (phi) * 0.6 * Fya * Ag = 1.00 * 0.6 * 50.00 * 3.00 = 90.00 kips

Using AISC 14th Ed. Equation J4-4
Net Area, An = (8.00 - (3 * (0.81 + 1/16))) * 0.38 = 2.02 in^2
Shear Rupture, (phi)Vnu = (phi) * 0.6 * Fua * An = 0.75 * 0.6 * 65.00 * 2.02 = 58.96 kips


Check Vertical Block Shear

Using AISC 14th Ed. Equation J4-5
Block Shear = {(phi) * ((0.6 * Fu * Anv) + (Ubs * Fu * Ant))} <= {(phi) * ((0.6 * Fy * Agv) + (Ubs * Fu * Ant))}

Block 1 (Shear): 
Gross Shear Length = (8.00 - 1.00) = 7.00 in.
Net Shear Length = 7.00 - (2.50 * (0.81 + 1/16) = 4.81 in.
Gross Tension Length = [edge dist.] = 1.50 in.
Net Tension Length = (1.50 - (0.81 + 1/16)/2) = 1.06 in.
1. (phi) * [material thickness] * ((0.60 * Fua* [net shear length]) + (Ubs * Fua * [net tension length])) 
    = 0.75 * 0.38 * ((0.60 * 65.00 * 4.81) + (1.00 * 65.00 * 1.06)) = 72.21 kips
2. (phi) * [material thickness] * ((0.60 * Fya * [gross shear length]) + (Ubs * Fua * [net tension length])) 
    = 0.75 * 0.38 * ((0.60 * 50.00 * 7.00) + (1.00 * 65.00 * 1.06)) = 78.49 kips
Block Shear = 72.21 kips

Block Shear for Axial T/C is not required.


Angle2 

Support Angle Leg 


Using AISC 14th Ed. Equation J4-3
Gross Area, Ag = 0.38 * 8.00 = 3.00 in^2
Shear Yielding, (phi)Vny = (phi) * 0.6 * Fya * Ag = 1.00 * 0.6 * 50.00 * 3.00 = 90.00 kips

Using AISC 14th Ed. Equation J4-4
Net Area, An = (8.00 - (3 * (0.81 + 1/16))) * 0.38 = 2.02 in^2
Shear Rupture, (phi)Vnu = (phi) * 0.6 * Fua * An = 0.75 * 0.6 * 65.00 * 2.02 = 58.96 kips


Check Vertical Block Shear

Using AISC 14th Ed. Equation J4-5
Block Shear = {(phi) * ((0.6 * Fu * Anv) + (Ubs * Fu * Ant))} <= {(phi) * ((0.6 * Fy * Agv) + (Ubs * Fu * Ant))}

Block 1 (Shear): 
Gross Shear Length = (8.00 - 1.00) = 7.00 in.
Net Shear Length = 7.00 - (2.50 * (0.81 + 1/16)) = 4.81 in.
Gross Tension Length = [edge dist.] = 1.37 in.
Net Tension Length = (1.37 - (1.00 + 1/16)/2) = 0.84 in.
1. (phi) * [material thickness] * ((0.60 * Fua* [net shear length]) + (Ubs * Fua * [net tension length])) 
    = 0.75 * 0.38 * ((0.60 * 65.00 * 4.81) + (1.00 * 65.00 * 0.84)) = 68.08 kips
2. (phi) * [material thickness] * ((0.60 * Fya * [gross shear length]) + (Ubs * Fua * [net tension length])) 
    = 0.75 * 0.38 * ((0.60 * 50.00 * 7.00) + (1.00 * 65.00 * 0.84)) = 74.35 kips
Block Shear = 68.08 kips

Beam Angle Leg 


Using AISC 14th Ed. Equation J4-3
Gross Area, Ag = 0.38 * 8.00 = 3.00 in^2
Shear Yielding, (phi)Vny = (phi) * 0.6 * Fya * Ag = 1.00 * 0.6 * 50.00 * 3.00 = 90.00 kips

Using AISC 14th Ed. Equation J4-4
Net Area, An = (8.00 - (3 * (0.81 + 1/16))) * 0.38 = 2.02 in^2
Shear Rupture, (phi)Vnu = (phi) * 0.6 * Fua * An = 0.75 * 0.6 * 65.00 * 2.02 = 58.96 kips


Check Vertical Block Shear

Using AISC 14th Ed. Equation J4-5
Block Shear = {(phi) * ((0.6 * Fu * Anv) + (Ubs * Fu * Ant))} <= {(phi) * ((0.6 * Fy * Agv) + (Ubs * Fu * Ant))}

Block 1 (Shear): 
Gross Shear Length = (8.00 - 1.00) = 7.00 in.
Net Shear Length = 7.00 - (2.50 * (0.81 + 1/16) = 4.81 in.
Gross Tension Length = [edge dist.] = 1.50 in.
Net Tension Length = (1.50 - (0.81 + 1/16)/2) = 1.06 in.
1. (phi) * [material thickness] * ((0.60 * Fua* [net shear length]) + (Ubs * Fua * [net tension length])) 
    = 0.75 * 0.38 * ((0.60 * 65.00 * 4.81) + (1.00 * 65.00 * 1.06)) = 72.21 kips
2. (phi) * [material thickness] * ((0.60 * Fya * [gross shear length]) + (Ubs * Fua * [net tension length])) 
    = 0.75 * 0.38 * ((0.60 * 50.00 * 7.00) + (1.00 * 65.00 * 1.06)) = 78.49 kips
Block Shear = 72.21 kips

Block Shear for Axial T/C is not required.


Total Support Side Shear Yielding Capacity =  min(YieldAngle1/Gage1 Ratio, YieldAngle2/Gage2 Ratio) =  min(180.00 , 180.00) = 180.00 kips
180.00 kips >= Reaction V = 14.00 kips (OK)
Total Support Side Shear Rupture Capacity =  min(RuptureAngle1/Gage1 Ratio, RuptureAngle2/Gage2 Ratio) = min(117.92 , 117.92) = 117.92 kips
117.92 kips >= Reaction V = 14.00 kips (OK)
Total Support Side Vertical Block Shear Capacity =  min(BlockAngle1/Gage1 Ratio, BlockAngle2/Gage2 Ratio) = min(136.15 , 136.15) = 136.15 kips
136.15 kips >= Reaction V = 14.00 kips (OK)
Total Beam Side Shear Yielding Capacity =  min (YieldAngle1/Gage1 Ratio , YieldAngle2/Gage2 Ratio) = min(180.00 , 180.00) = 180.00 kips
180.00 kips >= Reaction V = 14.00 kips (OK)
Total Beam Side Shear Rupture Capacity =  min (RuptureAngle1/Gage1 Ratio , RuptureAngle2/Gage2 Ratio) = min(117.92 , 117.92) = 117.92 kips
117.92 kips >= Reaction V = 14.00 kips (OK)
Total Beam Side Vertical Block Shear Capacity =  min (BlockAngle1/Gage1 Ratio , BlockAngle2/Gage2 Ratio) = min(144.43 , 144.43) = 144.43 kips
144.43 kips >= Reaction V = 14.00 kips (OK)

(Not applicable / No results )