bb.s.s.00088.00296

SHEAR PLATE CONNECTION SUMMARY

Filler Beam profile: W18X35
Support Girder profile: W18X40
Slope: 0 deg.
Skew: 83
Vertical Offset: -0.125
Horizontal Offset: 7.39
Span: 36.9 ft.
Reaction, V: 24 kips
Shear Capacity, Rn: 29.5 kips
Design/Reference according to AISC 14th Ed. - ASD
Shear Plate: Conventional Configuration
Beam material grade: A992
Support material grade: A992
Plate material grade: A36
Weld grade: E70
Shear Plate Size: 4.500 in. x 8.500 in. x 0.375 in.
Configuration Geometry:
Welds at shear plate to support: 4/16 FILLET, 5/16 FILLET
Bolt: 3 rows x 1 columns 0.75 in. Diameter A325N_TC bolts
Vertical spacing: 3 in.
Horizontal spacing: 3 in.
Shear plate edge setback = 1 in.
Beam centerline setback = 1.07 in.
Edge distance at vertical edge of plate: 1.5 in.
Edge distance at top edge of plate: 1.25 in.
Edge distance at bottom edge of plate: 1.25 in.
Edge distance at vertical edge of beam: 2 in.
Edge distance at top edge of beam: 2 in.
Edge distance at bottom edge of beam: 7.75 in.
Top cope depth: 1 in.
Top cope length: 2.5 in.
Bottom cope depth: 1 in.
Bottom cope length: 2.5 in.
Horizontal distance to first hole: 3 in.
Down distance from top of filler beam flange: 3 in.
Holes in beam web: STD diameter = 0.812 in.
Holes in shear plate: SSL diameter = 0.812 in., slot width = 1 in.

BOLT STRENGTH BEAM SIDE:

Bolt Strength:
Using Instantaneous Center Of Rotation Method (AISC 7-1)
ex = 1.523 in.
Angle = 0.000 deg.
C = 2.469
Using Table 7-1 to determine (1/omega) * rn:
Rn = (1/omega) * rn * C = 11.93 * 2.47 = 29.45 kips

BOLT BEARING AT BEAM SIDE:
Vertical Shear Only Load Case:
ICR cordinate relative to CG = (3.61, -0.00)
At Row 1, At Column 1:
Ri1 = 11.71 kips
Ri vector at Beam   = <7.48, 9.01>
Lcsbm at Beam spacing  = na
Lcebm at Beam edge    = 3.49 in.
1/omegaRnsbm at Beam spacing = 1/omega * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * na * (0.30/1) * 65.00 = na
1/omegaRnebm at Beam edge = 1/omega * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 3.49 * (0.30/1) * 65.00 = 40.87 kips/bolt
1/omegaRndbm on Beam at Bolt Diameter   = 1/omega * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.75 * (0.30/1) * 65.00 = 17.55 kips/bolt
Beam bearing capacity, 1/omegaRnbm = min(1/omegaRnsbm,1/omegaRnebm,1/omegaRndbm) = min(na, 40.87, 17.55) = 17.55 kips/bolt
Ri vector at Shear Plate   = <-7.48, -9.01>
Lcsshpl at Shear Plate spacing  = na
Lceshpl at Shear Plate edge    = 4.17 in.
1/omegaRnsshpl at Shear Plate spacing = 1/omega * hf1 * Lcs * t * Fu = 0.50 * 1.20 * na * 0.38 * 58.00 = na
1/omegaRneshpl at Shear Plate edge = 1/omega * hf1 * Lce * t * Fu = 0.50 * 1.20 * 4.17 * 0.38 * 58.00 = 54.39 kips/bolt
1/omegaRndshpl on Shear Plate at Bolt Diameter   = 1/omega * hf2 * db * t * Fu = 0.50 * 2.40 * 0.75 * 0.38 * 58.00 = 19.57 kips/bolt
Shear Plate bearing capacity, 1/omegaRnshpl = min(1/omegaRnsshpl,1/omegaRneshpl,1/omegaRndshpl) = min(na, 54.39, 19.57) = 19.57 kips/bolt
1/omegaRn = min(1/omegaRnbm, 1/omegaRnshpl) = min(17.550, 19.575) = 17.55 kips/bolt
Bolt Shear Demand to Bearing ratio = 17.55 / 11.71 = 1.50

At Row 2, At Column 1:
Ri1 = 11.44 kips
Ri vector at Beam   = <0.00, 11.44>
Lcsbm at Beam spacing  = 2.19 in.
Lcebm at Beam edge    = 4.59 in.
1/omegaRnsbm at Beam spacing = 1/omega * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * 2.19 * (0.30/1) * 65.00 = 25.59 kips/bolt
1/omegaRnebm at Beam edge = 1/omega * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 4.59 * (0.30/1) * 65.00 = 53.75 kips/bolt
1/omegaRndbm on Beam at Bolt Diameter   = 1/omega * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.75 * (0.30/1) * 65.00 = 17.55 kips/bolt
Beam bearing capacity, 1/omegaRnbm = min(1/omegaRnsbm,1/omegaRnebm,1/omegaRndbm) = min(25.59, 53.75, 17.55) = 17.55 kips/bolt
Ri vector at Shear Plate   = <-0.00, -11.44>
Lcsshpl at Shear Plate spacing  = 2.19 in.
Lceshpl at Shear Plate edge    = 3.84 in.
1/omegaRnsshpl at Shear Plate spacing = 1/omega * hf1 * Lcs * t * Fu = 0.50 * 1.20 * 2.19 * 0.38 * 58.00 = 28.55 kips/bolt
1/omegaRneshpl at Shear Plate edge = 1/omega * hf1 * Lce * t * Fu = 0.50 * 1.20 * 3.84 * 0.38 * 58.00 = 50.16 kips/bolt
1/omegaRndshpl on Shear Plate at Bolt Diameter   = 1/omega * hf2 * db * t * Fu = 0.50 * 2.40 * 0.75 * 0.38 * 58.00 = 19.57 kips/bolt
Shear Plate bearing capacity, 1/omegaRnshpl = min(1/omegaRnsshpl,1/omegaRneshpl,1/omegaRndshpl) = min(28.55, 50.16, 19.57) = 19.57 kips/bolt
1/omegaRn = min(1/omegaRnbm, 1/omegaRnshpl) = min(17.550, 19.575) = 17.55 kips/bolt
Bolt Shear Demand to Bearing ratio = 17.55 / 11.44 = 1.53

At Row 3, At Column 1:
Ri1 = 11.71 kips
Ri vector at Beam   = <-7.48, 9.01>
Lcsbm at Beam spacing  = na
Lcebm at Beam edge    = 2.72 in.
1/omegaRnsbm at Beam spacing = 1/omega * hf1 * Lcs * (tw/# shear planes) * Fu = 0.50 * 1.20 * na * (0.30/1) * 65.00 = na
1/omegaRnebm at Beam edge = 1/omega * hf1 * Lce * (tw/# shear planes) * Fu = 0.50 * 1.20 * 2.72 * (0.30/1) * 65.00 = 31.88 kips/bolt
1/omegaRndbm on Beam at Bolt Diameter   = 1/omega * hf2 * db * (tw/# shear planes) * Fu = 0.50 * 2.40 * 0.75 * (0.30/1) * 65.00 = 17.55 kips/bolt
Beam bearing capacity, 1/omegaRnbm = min(1/omegaRnsbm,1/omegaRnebm,1/omegaRndbm) = min(na, 31.88, 17.55) = 17.55 kips/bolt
Ri vector at Shear Plate   = <7.48, -9.01>
Lcsshpl at Shear Plate spacing  = na
Lceshpl at Shear Plate edge    = 1.10 in.
1/omegaRnsshpl at Shear Plate spacing = 1/omega * hf1 * Lcs * t * Fu = 0.50 * 1.20 * na * 0.38 * 58.00 = na
1/omegaRneshpl at Shear Plate edge = 1/omega * hf1 * Lce * t * Fu = 0.50 * 1.20 * 1.10 * 0.38 * 58.00 = 14.31 kips/bolt
1/omegaRndshpl on Shear Plate at Bolt Diameter   = 1/omega * hf2 * db * t * Fu = 0.50 * 2.40 * 0.75 * 0.38 * 58.00 = 19.57 kips/bolt
Shear Plate bearing capacity, 1/omegaRnshpl = min(1/omegaRnsshpl,1/omegaRneshpl,1/omegaRndshpl) = min(na, 14.31, 19.57) = 14.31 kips/bolt
1/omegaRn = min(1/omegaRnbm, 1/omegaRnshpl) = min(17.550, 14.312) = 14.31 kips/bolt
Bolt Shear Demand to Bearing ratio = 14.31 / 11.71 = 1.22

Min Bolt Shear Demand to Bearing ratio for vertical shear only = min(1.0, 1.49902, 1.53405, 1.22247) = 1.00


Bearing Capacity at Beam and Shear Plate at Vertical Shear Load Only, Rbv1 = Min Bolt Shear Demand to Bearing Ratio * Bolt Shear = 1.00 * 29.45 = 29.45 kips

Web Depth = d - [Top Cope Depth] - [Bottom Cope Depth] = 17.7 - 1 - 1 = 15.7 in.
Gross Area (Shear) = [Web Depth] * tw = 15.70 * 0.30 = 4.71 in^2
Net Shear Area (Shear) = ([Web Depth] - ([# rows] * [Diameter + 0.0625])) * tw 
    = (15.70 - (3 * 0.88)) * 0.30 = 3.92 in^2

Using Eq.J4-3:
Shear Yielding = (1/omega) * 0.6 * Fybeam * [Gross Area] = 0.67 * 0.6 * 50.00 * 4.71 = 94.20 kips

Using Eq.J4-4:
Shear Rupture = (1/omega) * 0.6 * Fubeam * [Net Area] = 0.50 * 0.6 * 65.00 * 3.92 = 76.49 kips


Block Shear

Using Eq.J4-5:
Block Shear = {(1/omega) * ((0.6 * Fu * Anv) + (Ubs * Fu * Ant))} <= {(1/omega) * ((0.6 * Fy * Agv) + (Ubs * Fu * Ant))}
Block Shear (1)
Gross Shear Length = [edge dist. at beam edge] + ([# rows - 1] * [spacing]) = 2 + 6 = 8.00 in.
Net Shear Length = Gross Shear Length - (# rows - 0.5) * (hole size + 0.0625) = 8 - (3 - 0.5) * 0.875 = 5.81 in.
Gross Tension Length = [edge dist. at beam edge] + ([# cols - 1] * [spacing]) = 2 + (1 - 1) * 3 = 2.00 in.
Net Tension Length = Gross Tension Length - (# cols - 0.5) * (hole size + 0.0625) = 2 - (1 - 0.5) * 0.875 = 1.56 in.
1. (1/omega) * [material thickness] * ((0.60 * Fubeam* [net shear length]) + (Ubs * Fubeam * [net tension length])) 
    = 0.50 * 0.30 * ((0.60 * 65.00 * 5.81) + (1.00 * 65.00 * 1.56)) = 49.24 kips
2. (1/omega) * [material thickness] * ((0.60 * Fybeam * [gross shear length]) + (Ubs * Fubeam * [net tension length])) 
    = 0.50 * 0.30 * ((0.60 * 50.00 * 8.00) + (1.00 * 65.00 * 1.56)) = 51.23 kips
Block Shear = 49.24 kips

Block Shear (1) Total = Block Shear (1) = 49.24 kips


Buckling and Flexure at Longest Cope (Top and Bottom Copes at Section)
Eccentricity at Section, e = 3.68 in.
If beam is coped at both top and bottom flanges,

Using Eq. 9-14 through 9-18, Fcr = Fy * Q
tw = 0.30 in.
ho = 15.70 in.
c = 2.50 in.
lambda = (ho * Fy ^ 0.5) / ( 10 * tw * ( 475.00 + 280.00 * (ho / c)^2 ) ^0.5 ) = 
 = 15.70 * 50.00^0.5 / (10 * 0.30 * (475.00 + 280.00 * (15.70/2.50)^2 )^0.5) = 0.34
When lambda <= 0.70, Q=1
Q = 1.00
Fcrmin =1/omega * Fcr = 0.60 * 50.00 * 1.00 = 30.00 ksi
Snet1 (bolt holes not applicable) = 12.32 in^3
Snet2 (bolt holes applicable) = 12.32 in^3
Znet = 18.49 in^3

Using Eq. 9-6
Buckling = Fcr * Snet1 / e = 30.00 * 12.32 / 3.68 = 100.42 kips

Using Eq. 9-19
Flexural Yielding = (1/omega) * Fy * Snet1 / e = 0.60 * 50.00 * 12.32 / 3.68 = 100.42 kips

Using Eq. 9-4
Flexural Rupture = (1/omega) * Fu * Znet / e = 0.50 * 65.00 * 18.49 / 3.68 = 163.19 kips


Buckling and Flexure at Furthest Bolt Line within Cope (Top and Bottom Copes at Section)
Eccentricity at Section, e = 3.18 in.
If beam is coped at both top and bottom flanges,

Using Eq. 9-14 through 9-18, Fcr = Fy * Q
tw = 0.30 in.
ho = 15.70 in.
c = 2.50 in.
lambda = (ho * Fy ^ 0.5) / ( 10 * tw * ( 475.00 + 280.00 * (ho / c)^2 ) ^0.5 ) = 
 = 15.70 * 50.00^0.5 / (10 * 0.30 * (475.00 + 280.00 * (15.70/2.50)^2 )^0.5) = 0.34
When lambda <= 0.70, Q=1
Q = 1.00
Fcrmin =1/omega * Fcr = 0.60 * 50.00 * 1.00 = 30.00 ksi
Snet1 (bolt holes not applicable) = 12.32 in^3
Snet2 (bolt holes applicable) = 10.01 in^3
Znet = 15.73 in^3

Using Eq. 9-6
Buckling = Fcr * Snet1 / e = 30.00 * 12.32 / 3.18 = 116.21 kips

Using Eq. 9-19
Flexural Yielding = (1/omega) * Fy * Snet1 / e = 0.60 * 50.00 * 12.32 / 3.18 = 116.21 kips

Using Eq. 9-4
Flexural Rupture = (1/omega) * Fu * Znet / e = 0.50 * 65.00 * 15.73 / 3.18 = 160.63 kips


Section Bending Strength Calculations Summary:

   Coped Beam Buckling and Flexure at Longest Cope (Top and Bottom Copes at Section)
   Buckling : 100.42 >= 24.00 kips (OK)
   Flexural Yielding : 100.42 >= 24.00 kips (OK)
   Flexural Rupture : 163.19 >= 24.00 kips (OK)

   Coped Beam Buckling and Flexure at Furthest Bolt Line within Cope (Top and Bottom Copes at Section)
   Buckling : 116.21 >= 24.00 kips (OK)
   Flexural Yielding : 116.21 >= 24.00 kips (OK)
   Flexural Rupture : 160.63 >= 24.00 kips (OK)

Gross Area = 0.38 * 8.50 = 3.19 in^2
Net Area = (8.50 - (3 *(0.81 + 1/16))) * 0.38 = 2.20 in^2

Using Eq.J4-3:
Shear Yielding = (1/omega) * 0.6 * Fypl * [Gross Area] = 0.67 * 0.6 * 36.00 * 3.19 = 45.90 kips

Using Eq.J4-4:
Shear Rupture = (1/omega) * 0.6 * Fupl * [Net Area] = 0.50 * 0.6 * 58.00 * 2.20 = 38.33 kips


Block Shear

Using Eq.J4-5:
Block Shear = {(1/omega) * ((0.6 * Fu * Anv) + (Ubs * Fu * Ant))} <= {(1/omega) * ((0.6 * Fy * Agv) + (Ubs * Fu * Ant))}
Block 1 (Shear): 
Gross Shear Length = (8.5 - 1.25) = 7.25 in.
Net Shear Length = 7.25 - (2.5 * (0.812 + 0.0625)) = 5.06 in.
Gross Tension Length = (0 + 1.5) = 1.50 in.
Net Tension Length = 1.5 - (0.5 * (1 + 0.0625)) = 0.97 in.
1. (1/omega) * [material thickness] * ((0.60 * Fupl* [net shear length]) + (Ubs * Fupl * [net tension length])) 
    = 0.50 * 0.38 * ((0.60 * 58.00 * 5.06) + (1.00 * 58.00 * 0.97)) = 43.57 kips
2. (1/omega) * [material thickness] * ((0.60 * Fypl * [gross shear length]) + (Ubs * Fupl * [net tension length])) 
    = 0.50 * 0.38 * ((0.60 * 36.00 * 7.25) + (1.00 * 58.00 * 0.97)) = 39.90 kips
Block Shear = 39.90 kips


Interaction Check of Flexural Yielding, Per AISC 10-5: 
Eccentricity due to Conventional Config. (e = a/2), e = 1.52 in.
Zgross = 6.77
Znet = 4.73
Mr = Vr * e = 24.00 * 1.52 = 36.55 kips-in
Mc = 1/omega * Mn = 1/omega * Fy * Zgross = 0.60 * 36.00 * 6.77 = 146.31 kips-in
Vr = 24.00 kips
Vc = 1/omega * Vn = 1/omega * 0.60 * Fy * Ag = 0.67 * 0.60 * 36.00 * 3.19 = 45.90 kips
Interaction due to moment and shear, (Vr/Vc)^2 + (Mr/Mc)^2 <= 1.0
(Vr/Vc)^2 + (Mr/Mc)^2 = (24.00 / 45.90)^2 + (36.55 / 146.31)^2 = 0.34 <= 1  (OK)

Note: Mn <= 1.6My by inspection

MAXIMUM PLATE THICKNESS:
No of columns = 1
Distance cl top to cl bot bolts <= 12" (Equivalent depth of n = 1 to 5 at 3", AISC Table 10-9)
Slot shape = SSL
tmax = Unlimited
Maximum Plate Thickness is Not a Limiting Criteria.

WELD:

 Weld Requirements:

At shear only case: 
Weld Length for shear, Lv = 8.500 in.
Shear Load per inch per weld, fv = R/Lv/2 = 24.000 / 8.500 / 2 = 1.412 kips/in/ weld 
theta = 0 deg.
cPhi  = 1.0 + 0.5 * sin(0)^1.5 = 1.000
Weld Coefficient = 0.6 * 70.000 * 1.000 * 1.000 * (2^0.5/2)*(1/16) = 1.856
Required weld size, Dv = fv/ (1/omega * coeff) = 1.412 / (0.500 * 1.856) = 1.521/16

Minimum fillet weld size : 
   At shear only load case = 0.10 in.
   per Table J2.4     = 0.19 in.
   5/8(tp)            = 0.23 in.
   user preference    = 0.25 in.

Dmax1 (using eqn 9-3)
 = tshpl * Fushpl / ( Fexx * C1 * 0.088)
 = 0.375 * 58.000 / ( 70.000 * 1.000 * 0.088 ) 
 = 3.515 
Dmax2 (using eqn 9-3)
 = twsupport * Fusupport / ( Fexx * C1 * 0.088 )
 = 0.315 * 65.000 / ( 70.000 * 1.000 * 0.088 ) 
 = 3.309 
Dmax3 = project max fillet weld = 12.000
Dmax=min(Dmax1, Dmax2, Dmax3) = min(3.515, 3.309, 12.000)
 = 3.309 

Dihedral Angle, DA       = 83.00 deg.
Gap on Obtuse Angle Side = 0.05 in.
Use weld size
Acute Side  D1 = 4.00
Obtuse Side D2 = 5.00

Weld Strength :
Vertical weld capacity during shear only load, 1/omega * Rnv1 = 0.50 * 1.86 * 8.50 * (3.31 + 3.31) = 52.21 kips
Check Effective Throat:
Acute Side Effect throat  = (D1/sin(DA)) * cos(DA/2) = (0.25/ sin( 83.00)) * cos( 41.50) = 0.19 in.
Obtuse Side Effect throat = ((D2/sin(DA)-tshpl/tan(DA))*sin((180-(180-DA))/2))= ((0.31 / sin(83.00) -0.38 / tan(83.00)) * sin((180 - (180 - 83.00)) / 2)) = 0.14 in.
Total Effective Throat    = 0.19 + 0.14 = 0.37 in.
Total Effective Throat of Square Case = D1 * 2^0.5 = 0.25 * 2^0.5 = 0.35 in.
0.35 in. <= 0.37 in. (OK)